|
Gowri Shankar, M., Bharathiraja, M., Kumar, H., Yokeshwaran, R.K., Pradeep Kumar,
T., Chethan, R., Satyanarayana Gupta, M., "Development of adaptive headlight system
for automobile", AIP Conference Proceedings, Vol. No.2492, Issue No., pp.-, 2023
|
|
Tamilvanan, A., Bharathiraja, M., Balamurugan, K., Sasikumar, C., "Effect of
aluminium oxide nanoadditive on diesel along with gasoline fumigation in single
cylinder diesel engine", Journal of Engineering Research (Kuwait), Vol. No.10, Issue
No.3, pp.145-155, 2022 |
|
Arjunraj, P., Jeyakumar, P.D., Dineshkumar, C., Bharathiraja, M., "Correction:
Effects of novel intake manifold design and investigation of diesel engine operating
on different alternative fuels (Journal of Thermal Analysis and Calorimetry, (2022),
147, 13, (7471-7484), 10.1007/s10973-021-10817-z)", Journal of Thermal Analysis and
Calorimetry, Vol. No.147, Issue No.13, pp.7485-7487, 2022 |
|
Arjunraj, P., Jeyakumar, P.D., Dineshkumar, C., Bharathiraja, M., "Effects of novel
intake manifold design and investigation of diesel engine operating on different
alternative fuels'', Journal of Thermal Analysis and Calorimetry, Vol. No.147, Issue
No.13, pp.7471-7484, 2022 |
|
Tamilvanan, A., Balamurugan, K., Ashok, B., Selvakumar, P., Dhamotharan, S.,
Bharathiraja, M., Karthickeyan, V., "Effect of diethyl ether and ethanol as an
oxygenated additive on Calophyllum inophyllum biodiesel in CI engine", Environmental
Science and Pollution Research, Vol. No.28, Issue No.26, pp.33880-33898, 2021 |
|
Vaideeswaran, V., Veerakumar, S., Sharmeela, C., Bharathiraja, M., Chandrasekaran,
P., "Modelling of an Electric Vehicle Charging Station with PWM Rectifier to
mitigate the Power Quality Issues", 2021 IEEE Transportation Electrification
Conference, ITEC-India 2021, Vol. No., Issue No., pp.-, 2021 |
|
Bharathiraja, M., Karu, R., Arjunraj, P., Jeyakumar, P.D., "Comparison of Concurrent
Reduction of Smoke and NOx Emission Techniques'', Lecture Notes in Mechanical
Engineering, Vol. No., Issue No., pp.391-401, 2021 |
|
Bharathiraja, M., Venkatachalam, R., Senthilmurugan, V., "Performance, emission,
energy and exergy analyses of gasoline fumigated DI diesel engine", Journal of
Thermal Analysis and Calorimetry, Vol. No.136, Issue No.1, pp.281-293, 2019 |
|
Arjunraj, P., Subramanian, M., Jeyakumar, P.D., Bharathiraja, M., "Thermal
durability analysis of PA6-GF30 and PA66-GF30 air intake manifold", Journal of
Advanced Research in Dynamical and Control Systems, Vol. No.11, Issue No.7 Special
Issue, pp.811-819, 2019 |
|
Bharathiraja, M., Venkatachalam, R., Murugesan, A., Tiruvenkadam, N., "Experimental
investigation of a novel alcohol fumigation in a single-cylinder constant speed
diesel engine", International Journal of Ambient Energy, Vol. No.38, Issue No.8,
pp.794-802, 2017 |
|
Bharathiraja, M., Venkatachalam, R., Tiruvenkadam, N., "Experimental analysis of
exhaust gas after treatment system using water scrubbing in a single cylinder diesel
engine for diesel and biofuel blends", Transportation Research Part D: Transport and
Environment, Vol. No.49, Issue No., pp.291-300, 2016 |
|
Vijayakumar, C., Ramesh, M., Murugesan, A., Panneerselvam, N., Subramaniam, D.,
Bharathiraja, M., "Biodiesel from plant seed oils as an alternate fuel for
compression ignition engines—a review", Environmental Science and Pollution
Research, Vol. No.23, Issue No.24, pp.24711-24730, 2016 |
|
Tiruvenkadam, N., Thyla, P.R., Senthilkumar, M., Bharathiraja, M., "Development of
optimum friction new nano hybrid composite liner for biodiesel fuel engine",
Transportation Research Part D: Transport and Environment, Vol. No.47, Issue No.,
pp.22-43, 2016 |
|
Tiruvenkadam, N., Thyla, P.R., Senthilkumar, M., Bharathiraja, M., Murugesan, A.,
"Synthesis of new aluminum nano hybrid composite liner for energy saving in diesel
engines", Energy Conversion and Management, Vol. No.98, Issue No., pp.440-448, 2015
|
|
Rajasekaran, T., Duraiswamy, K., Bharathiraja, M., Poovaragavan, S.,
"Characteristics of engine at various speed conditions by mixing of HHO with
gasoline and LPG", ARPN Journal of Engineering and Applied Sciences, Vol. No.10,
Issue No.1, pp.46-51, 2015 |
|
Bharathiraja, M., Manikalithas, P., Venkatachalam, R., "Experimental investigation
of performance and emission characteristics of non-preheated and preheated Karanja
oil blend as alternate fuel in the compression-ignition engine", International
Journal of Ambient Energy, Vol. No.35, Issue No.2, pp.71-79, 2014 |
|
Jegadheeswaran, S., Sundaramahalingam, A., "Synthesis and characterization of copper
nanoparticles-embedded paraffin wax for solar energy storage", Journal of Thermal
Analysis and Calorimetry, Vol. No.148, Issue No.9, pp.3417-3425, 2023 |
|
Jegadheeswaran, S., Sundaramahalingam, A., "Experimental Investigations of the
Effect of Ultrasonic Waves on the Thermal Performance of Nanoparticles Embedded
Phase Change Material", International Journal of Thermophysics, Vol. No.44, Issue
No.1, pp.-, 2023 |
|
Gokul, L.S., Jegadheeswaran, S., "Performance, Combustion and Emission
Characteristics of Direct Injection Diesel Engine with Plastic Oil Extracted from
Compact Discs", Solid Fuel Chemistry, Vol. No.56, Issue No.6, pp.488-495, 2022 |
|
Sathish, D., Jegadheeswaran, S., Veeramanikandan, M., "Enhancing the thermo-economic
performance of mobile solar desalination system with dual reflectors, phase change
materials and insulator cover: Experimental investigations", Applied Thermal
Engineering, Vol. No.217, Issue No., pp.-, 2022 |
|
Sathish Kumar, T.R., Jegadheeswaran, S., "Experimental Investigation on Finned Solar
Still with Enhanced Thermal Energy Storage", Journal of Thermal Science and
Engineering Applications, Vol. No.14, Issue No.9, pp.-, 2022 |
|
Raja Sekar, K., Jegadheeswaran, S., Kannan, R., Manigandan, P., "Perforated Wall in
Controlling the Separation Bubble Due to Shock Wave -Boundary Layer Interaction",
International Journal of Turbo and Jet Engines, Vol. No.39, Issue No.2, pp.223-231,
2022 |
|
Sathish, D., Jegadheeswaran, S., "Experimental Investigation on a Novel Composite
Salt Gradient Solar Pond With an East–West Side Reflector", Journal of Thermal
Science and Engineering Applications, Vol. No.14, Issue No.3, pp.-, 2022 |
|
Sundaramahalingam, A., Jegadheeswaran, S., "Heat Transfer Enhancement of Latent Heat
Storage Using Novel Quadruple Helical Fins", Heat Transfer Engineering, Vol. No.43,
Issue No.22, pp.1900-1917, 2022 |
|
Jegadheeswaran, S., Sundaramahalingam, A., Pohekar, S.D., "Alternative Heat Transfer
Enhancement Techniques for Latent Heat Thermal Energy Storage System: A Review",
International Journal of Thermophysics, Vol. No.42, Issue No.12, pp.-, 2021 |
|
Sathish, D., Jegadheeswaran, S., "Evolution and novel accomplishments of solar pond,
desalination and pond coupled to desalination systems: a review", Journal of Thermal
Analysis and Calorimetry, Vol. No.146, Issue No.5, pp.1923-1969, 2021 |
|
Jegadheeswaran, S., "Message", Proceedings - 1st International Conference on Smart
Technologies Communication and Robotics, STCR 2021, Vol. No., Issue No., pp.-, 2021
|
|
Gokul, L.S., Jegadheeswaran, S., Sasikumar, C., "Thermal Analysis and
Characterization of Catalytically Cracked Jatropha Bio-Oil", Springer Proceedings in
Materials, Vol. No.5, Issue No., pp.417-425, 2021 |
|
Sundaramahalingam, A., Jegadheeswaran, S., Ponmurugan, M., Sasikumar, C., "Review on
Thermal Energy Storage with Phase Change Materials and Its Applications", Springer
Proceedings in Materials, Vol. No.5, Issue No., pp.543-554, 2021 |
|
Prakash, K.B., Amarkarthik, A., Ravikumar, M., Manoj Kumar, P., Jegadheeswaran, S.,
"Optimizing Performance Characteristics of Blower for Combustion Process Using
Taguchi Based Grey Relational Analysis", Springer Proceedings in Materials, Vol.
No.5, Issue No., pp.155-163, 2021 |
|
Sivakumar, K., Kumar, P.M., Amarkarthik, A., Jegadheeswaran, S., Shanmugaprakash,
R., "Empirical modeling of material removal rate and surface roughness of OHNS steel
using Cu-TiB2Tool in EDM", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.2725-2729, 2021 |
|
Sekar, K.R., Karthick, S.K., Jegadheeswaran, S., Kannan, R., "On the unsteady
throttling dynamics and scaling analysis in a typical hypersonic inlet-isolator
flow", Physics of Fluids, Vol. No.32, Issue No.12, pp.-, 2020 |
|
Sasikumar, C., Balamurugan, K., Jegadheeswaran, S., Sathyamurthy, R., "Optimization
of process parameter in the production of Jatropha Methyl Ester using response
surface methodology", Biocatalysis and Agricultural Biotechnology, Vol. No.27, Issue
No., pp.-, 2020 |
|
Dhandayuthabani, M., Jegadheeswaran, S., Vijayan, V., Antony, A.G., "Mathematical
prospective of latent heat storage system with CuO micro particle enhancement",
Applied Mathematics and Information Sciences, Vol. No., Issue No.2, pp.289-295, 2020
|
|
Dhandayuthabani, M., Jegadheeswaran, S., Vijayan, V., Antony, A.G., "Investigation
of latent heat storage system using graphite micro-particle enhancement", Journal of
Thermal Analysis and Calorimetry, Vol. No.139, Issue No.3, pp.2181-2186, 2020 |
|
Sathish, D., Jegadheeswaran, S., "Effective study of thermal behavior on membrane
stratified portable solar pond", Materials Today: Proceedings, Vol. No.27, Issue
No., pp.23-25, 2020 |
|
Jegadheeswaran, S., Sundaramahalingam, A., Pohekar, S.D., "High-conductivity
nanomaterials for enhancing thermal performance of latent heat thermal energy
storage systems", Journal of Thermal Analysis and Calorimetry, Vol. No.138, Issue
No.2, pp.1137-1166, 2019 |
|
Prakash, R.S., Sivakumar, K., Jegadheeswaran, S., Amarkarthik, A., Mathankumar, P.,
"Parameters optimization of copper powder mixed dielectric and pure dielectric
medium in wire electrical discharge machining of AISI D3 steel", AIP Conference
Proceedings, Vol. No.2128, Issue No., pp.-, 2019 |
|
Sathish Kumar, T.R., Jegadheeswaran, S., Chandramohan, P., "Performance
investigation on fin type solar still with paraffin wax as energy storage media",
Journal of Thermal Analysis and Calorimetry, Vol. No.136, Issue No.1, pp.101-112,
2019 |
|
Prakash, K.B., Amarkarthik, A., Jegadheeswaran, S., Prakash, S., "Influence on
performance and emission characteristics of diesel engine by blending n-butanol and
n-pentanol as additives with diesel", Journal of Green Engineering, Vol. No.9, Issue
No.1, pp.60-75, 2019 |
|
Mathankumar, P., Sivakumar, K., Amarkarthik, A., Jegadheeswaran, S., "Effect of edm
process parameter on machining of ohns steel using CU-CRB 2 electrode",
International Journal of Mechanical and Production Engineering Research and
Development, Vol. No.9, Issue No., pp.309-315, 2019 |
|
Sundaramahalingam, A., Jegadheeswaran, S., Karuppasamy, K., Ponmurugan, M.,
"Influence of egr on performance, emissions and combustion of a diesel engine
operated on blends of castor oil methyl ester", International Journal of Mechanical
and Production Engineering Research and Development, Vol. No.9, Issue No.,
pp.203-219, 2019 |
|
Gokul, L.S., Jegadheeswaran, S., "Design and fabrication of semi automatic ironing
and folding machine", International Journal of Mechanical and Production Engineering
Research and Development, Vol. No.9, Issue No., pp.256-267, 2019 |
|
Lawrence Xavier, M., Balaji, J., Deepan Kumar, S., Jegadheeswaran, S., Ravi Kumar,
M., "Design & analysis of hybrid leaf spring using ansys", International Journal
of Mechanical and Production Engineering Research and Development, Vol. No.9, Issue
No., pp.194-202, 2019 |
|
Raja Sekar, K., Jegadheeswaran, S., Kannan, R., Vadivelu, P., Prasad, G., "Numerical
investigation of single ramp scramjet inlet characteristics at mach number 5.96 due
to shock Wave–Boundary layer interaction", Lecture Notes in Mechanical Engineering,
Vol. No., Issue No., pp.181-186, 2019 |
|
Sathish, D., Jegadheeswaran, S., "Relative study of steel solar pond with sodium
chloride and pebbles", Materials Science for Energy Technologies, Vol. No.1, Issue
No.2, pp.171-174, 2018 |
|
Balaji, J., Lawrence Xavier, M., Jegadheeswaran, S., Ravi Kumar, M., "Nox – PM trade
off improvement using hcci engine operated with dee and diesel", International
Journal of Mechanical and Production Engineering Research and Development, Vol.
No.8, Issue No.Special Issue 7, pp.1-8, 2018 |
|
Nagulan, S., Selvaraj, J., Arunachalam, A., Sivanandam, K., "Performance of
artificial neural network in prediction of heave displacement for nonbuoyant type
wave energy converter", IET Renewable Power Generation, Vol. No.11, Issue No.1,
pp.81-84, 2017 |
|
Sathish, D., Sathish Kumar, T.R., Jegadheeswaran, S., "Experimental and theoretical
study on efficiency of portable mini solar pond using dissimilar salts", Pakistan
Journal of Biotechnology, Vol. No.13, Issue No., pp.15-20, 2016 |
|
Uvaraja, V.C., Natarajan, N., Sivakumar, K., Jegadheeshwaran, S., Sudhakar, S.,
"Tribological behavior of heat treated Al 7075 aluminium metal matrix composites",
Indian Journal of Engineering and Materials Sciences, Vol. No.22, Issue No.1,
pp.51-61, 2015 |
|
Jesumathy, S.P., Udayakumar, M., Suresh, S., Jegadheeswaran, S., "An experimental
study on heat transfer characteristics of paraffin wax in horizontal double pipe
heat latent heat storage unit", Journal of the Taiwan Institute of Chemical
Engineers, Vol. No.45, Issue No.4, pp.1298-1306, 2014 |
|
Kousksou, T., Jamil, A., Arid, A., Jegadheeswaran, S., Zeraouli, Y.,
"Crystallisation kinetics with nucleation phenomenon: Ice slurry system",
International Journal of Refrigeration, Vol. No.35, Issue No.7, pp.1921-1930, 2012
|
|
Arid, A., Kousksou, T., Jegadheeswaran, S, Jamil, A., Zeraouli, Y., "Numerical
simulation of ice melting near the density inversion point under periodic thermal
boundary conditions", Fluid Dynamics and Materials Processing, Vol. No.8, Issue
No.3, pp.257-275, 2012 |
|
Jegadheeswaran, S., Pohekar, S.D., Kousksou, T., "Conductivity particles dispersed
organic and inorganic phase change materials for solar energy storage - An exergy
based comparative evaluation", Energy Procedia, Vol. No.14, Issue No., pp.643-648,
2012 |
|
Jegadheeswaran, S., Pohekar, S.D., Kousksou, T., "Performance Enhancement of Solar
Latent Heat Thermal Storage System with Particle Dispersion - an Exergy Approach",
Clean - Soil, Air, Water, Vol. No.39, Issue No.10, pp.964-971, 2011 |
|
El Rhafiki, T., Kousksou, T., Jamil, A., Jegadheeswaran, S., Pohekar, S.D.,
Zeraouli, Y., "Crystallization of PCMs inside an emulsion: Supercooling phenomenon",
Solar Energy Materials and Solar Cells, Vol. No.95, Issue No.9, pp.2588-2597, 2011
|
|
Jegadheeswaran, S., Pohekar, S.D., "Exergy analysis of particle dispersed latent
heat thermal storage system for solar water heaters", Journal of Renewable and
Sustainable Energy, Vol. No.2, Issue No.2, pp.-, 2010 |
|
Jegadheeswaran, S., Pohekar, S.D., Kousksou, T., "Exergy based performance
evaluation of latent heat thermal storage system: A review", Renewable and
Sustainable Energy Reviews, Vol. No.14, Issue No.9, pp.X2580-2595, 2010 |
|
Jegadheeswaran, S., Pohekar, S.D., "Performance enhancement in latent heat thermal
storage system: A review", Renewable and Sustainable Energy Reviews, Vol. No.13,
Issue No.9, pp.2225-2244, 2009 |
|
Annapoorani B.T.; Santhosh Kumar S., "Effective design of an integrated filtering
antenna for body area networks in ISM band", AIP Conference Proceedings, Vol.
No.2725, Issue No., pp.-, 2023 |
|
Tamilselvan, A., Mohamed Nihal Nadvi, S., Sudhan, V.R., Kesav Raj Narayan, R.,
Deepakkumar, S., Sankar, "Fabrication of water sprayer system for the enhancement of
heat dissipation in disc brake", AIP Conference Proceedings, Vol. No.2492, Issue
No., pp.-, 2023 |
|
Deepan Kumar, S., Sivananth, V., Tamilselvan, A., Praveenkumar, N., Arulkumar, S.,
Boobalan, S., "Experimental Investigation on the Tensile and Wear Characteristics of
Journal Bearing Materials Used in Automobile Engine Application", SAE Technical
Papers, Vol. No., Issue No., pp.-, 2022 |
|
Tamilselvan, A., Kundu, M., "Ex-situ synthesis of MnS nanoparticles imbedded with
carbon nanotubes as a high-performance electrode material for supercapacitors",
Materials Today: Proceedings, Vol. No.68, Issue No., pp.146-151, 2022 |
|
Tamilselvan, A., Durgalakshmi, D., Ajay Rakkesh, R., Balakumar, S., "Enhanced
photocatalytic activity of TiO2 nanotubes arrays decorated with Ag and Pt
nanoparticles", Materials Today: Proceedings, Vol. No.64, Issue No., pp.1822-1831,
2022 |
|
Ramya, D., Ramkumar, R., Tamilselvan, A., Jagadesh, V.S., "High efficiency
bridgeless single power conversion battery charger for electric vehicle", Materials
Today: Proceedings, Vol. No.66, Issue No., pp.1352-1360, 2022 |
|
Tamilselvan, A., Balakumar, S., "Anatase TiO2 nanotube by electrochemical
anodization method: effect of tubes dimension on the supercapacitor application",
Ionics, Vol. No.22, Issue No.1, pp.99-105, 2016 |
|
Tamilselvan, A., Balakumar, S., "Dimension and morphology controlled fabrication of
TiO 2 nanotubes by electrochemical anodization method", AIP Conference Proceedings,
Vol. No.1665, Issue No., pp.-, 2015 |
|
Tamilselvan, A., Balakumar, S., Sakar, M., Nayek, C., Murugavel, P., Saravana Kumar,
K., "Role of oxygen vacancy and Fe-O-Fe bond angle in compositional, magnetic, and
dielectric relaxation on Eu-substituted BiFeO3 nanoparticles", Dalton Transactions,
Vol. No.43, Issue No.15, pp.5731-5738, 2014 |
|
Nayek, C., Tamilselvan, A., Thirmal, C., Murugavel, P., Balakumar, S., "Origin of
enhanced magnetization in rare earth doped multiferroic bismuth ferrite", Journal of
Applied Physics, Vol. No.115, Issue No.7, pp.-, 2014 |
|
Sampath, M., Vijayan, R., Tamilarasu, E., Tamilselvan, A., Sengottuvelan, B., "Green
synthesis of novel jasmine bud-shaped copper nanoparticles", Journal of
Nanotechnology, Vol. No.2014, Issue No., pp.-, 2014 |
|
Tamilselvan, A., Sakar, M., Nayek, C., Murugavel, P., Balakumar, S., "Effect of
europium substitution on the magnetic and optical properties of nanostructured
bismuth ferrite", AIP Conference Proceedings, Vol. No.1512, Issue No., pp.1162-1163,
2013 |
|
Raja, T., Kumaresan, G., Pawar, N., "Parametric study on design and operating
variables influence on the performance of polymer electrolyte membrane fuel cell
(PEMFC) - A review", AIP Conference Proceedings, Vol. No.2492, Issue No., pp.-, 2023
|
|
Raja, T., Kumaresan, G., "Numerical analysis of the influence of flow direction on
heat distribution performance of a PEM fuel cell with serpentine flow field deign",
Materials Today: Proceedings, Vol. No.66, Issue No., pp.838-844, 2022 |
|
Kumar, V.S., Balamurugan, R., Raja, T., Saravanan, B., "Experimental investigation
on reliable and accurate prediction of buckling analysis of thin cylindrical shells
with geometric imperfections", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.841-851, 2021 |
|
Subbiah, G., Allaudeen, A.S., Janarthanam, H., Mani, P., Gnanamani, S., Raja,
K.S.S., Raja, T.A., "Computational investigation and design optimization of vortex
generator for a sport utility vehicle using CFD", AIP Conference Proceedings, Vol.
No.2311, Issue No., pp.-, 2020 |
|
Raja, T., Rajasekar, R., Siva, R., Karthik, N., Kumarasubramanian, R., "Redesigning
of the diesel engine turbocharger compressor wheel to improve the low-cycle fatigue
life", International Journal of Ambient Energy, Vol. No.40, Issue No.8, pp.821-826,
2019 |
|
Raja, T., Kumar, V.S., Gobinath, R., "Structural design and analysis of trestle used
for ship construction and repair", AIP Conference Proceedings, Vol. No.2128, Issue
No., pp.-, 2019 |
|
Kumar, V.S., Raja, T., Balamurugan, R., Dhayaneethi, S., "Experimental and numerical
investigation of thin cylindrical shell subjected to axial compression loading", AIP
Conference Proceedings, Vol. No.2128, Issue No., pp.-, 2019 |
|
Raja, T., Gopinath, R., Sudhir Kumar, V., "Numerical simulation of effect of design
modification in heat rejection rate of cooling fins for air-cooled internal
combustion engine", International Journal of Mechanical and Production Engineering
Research and Development, Vol. No.8, Issue No.7 Special Issue, pp.1143-1150, 2018
|
|
Sudhir Kumar, V., Raja, T., "Active controlling of hydraulic actuating mechanism in
a quarter car model by application of proportional integral derivative controller",
International Journal of Mechanical and Production Engineering Research and
Development, Vol. No.8, Issue No.Special Issue 7, pp.775-782, 2018 |
|
Mathiselvan, G., Gobinath, R., Yuvaraja, S., Raja, T., "Design, Static Analysis and
Fabrication of Composite Joints", IOP Conference Series: Materials Science and
Engineering, Vol. No.197, Issue No.1, pp.-, 2017 |
|
Raja, T., Mathiselvan, G., Sreenivasulureddy, M., Goldwin Xavier, X., "Design and
analysis of Air flow duct for improving the thermal performance of disc brake
rotor", IOP Conference Series: Materials Science and Engineering, Vol. No.197, Issue
No.1, pp.-, 2017 |
|
Raja, T., Ramarao, V., "Reduction of accident fatalities and injuries in frontal
collision of a passenger (Suv) car travelling at high speed", International Journal
of Applied Engineering Research, Vol. No.10, Issue No.2, pp.5117-5124, 2015 |
|
Reddy, S., Mutyala, V.R., Raja, T., "Turning of AISI 4130 alloy steel using
vegetable oil based cutting fluid by minimum quantity lubrication", International
Journal of Applied Engineering Research, Vol. No.10, Issue No.3, pp.6089-6101, 2015
|
|
Goldwin Xavier, X., Rajasekar, R., Raja, T., "Design of hybrid energy system for
refrigeration", International Journal of Applied Engineering Research, Vol. No.9,
Issue No.24, pp.24617-24623, 2014 |
|
Mutyala, V.R., Raja, T., Karthik, N., "Influence of Stainless Steel Metal Strip over
Piston Crown on the Performance and Emission Charecteristics of a Single Cylinder
Four Stroke Di Diesel Engine", International Journal of Applied Engineering
Research, Vol. No.9, Issue No.22, pp.14157-14169, 2014 |
|
Sudhir Kumar, V., Balamurugan, R., Kishore, A., Divya Prakash, B., Praveen, A.,
"Optimization and Vibrational Analysis of Coaxial Rotor for Special Purpose
Vehicle", Lecture Notes in Mechanical Engineering, Vol. No., Issue No., pp.17-37,
2023 |
|
Sudhir Kumar, V., Ponvaanan, P., Srinivasan, M., Naveen Kumar, A., "Active
Controlling of Cabin Benzene from Front Dashboard for Driver Passenger Safety",
Materials Today: Proceedings, Vol. No.45, Issue No., pp.8224-8229, 2021 |
|
Balamurugan, R., Madhankumar, S., Sudhir Kumar, V., Bannari, R.T., "Investigation on
design and analysis of passenger car body crash-worthiness in frontal impact using
radioss", SAE Technical Papers, Vol. No., Issue No.2020, pp.-, 2020 |
|
Sudhir Kumar, V., Sunil, S., "Establishment of Defect Free Weldment Parameters for
Higher Productivity in Flash Butt Welding Machine", SAE Technical Papers, Vol. No.,
Issue No.2020, pp.-, 2020 |
|
Saravanan, B., Natarajan, N., Deepankumar, S., Dhayaneethi, S., Vinithkumar, K.,
Kumaragurubaran, S.B., "Experimental Investigation Towards Enhancement of Catalytic
Converter by Modifying the Elements of Honeycomb Section", Lecture Notes in
Mechanical Engineering, Vol. No., Issue No., pp.281-292, 2023 |
|
Deepan Kumar, S., Dhayaneethi, S., Manojkumar, R., Gopal, M., Vishnu, A.,
"Investigation on Thermophysical Characterization of Nano Composite Phase Change
Materials for Battery Cooling in EV", SAE Technical Papers, Vol. No., Issue No.,
pp.-, 2022 |
|
Dhayaneethi, S., Anburaj, J., Arivazhagan, S., "Multi-objective optimization of
alloying elements to enhance the wear resistance and impact strength of HCCI
produced by furan sand mold", Proceedings of the Institution of Mechanical
Engineers, Part E: Journal of Process Mechanical Engineering, Vol. No.236, Issue
No.4, pp.1566-1580, 2022 |
|
Saravanan, B., Natarajan, N., Deepankumar, S., Dhayaneethi, S., Praveen, S.M., Neha,
S., "Experimental analysis on evaporative emission from ceramic coated fuel tank",
Materials Today: Proceedings, Vol. No.66, Issue No., pp.1376-1381, 2022 |
|
Deepankumar, S., Saravanan, B., Sudhirkumar, V., Boopalan, N., Sundaramahalingam,
A., Dhayaneethi, S., "Design and Analysis with Optimization of Car Radiators Using
Nanofluids", Lecture Notes in Mechanical Engineering, Vol. No., Issue No., pp.33-46,
2021 |
|
Dhayaneethi, S., Kumar, S.S., Vickram, K., Kumar, V.S., "Investigation of wear
behavior of functionally graded Al-Si alloy produced by cast decant cast (CDC)
method", AIP Conference Proceedings, Vol. No.2128, Issue No., pp.-, 2019 |
