|
Uma, K., Senthilkumar, G., Balamurugan, K., "Nano metal oxide (CuO/Co3O4) based feed
stock filament for FDM", Journal of Mechanical Science and Technology, Vol. No.37,
Issue No.9, pp.4817-4823, 2023 |
|
Ramachandra Raju, K., Senthilkumar, G., Santhoshkumar, E., Saravanakumar, B.,
Manikandan, B., Gokul, M., Nalli, N., "Development of a versatile ground nut
shelling machine with built-in roaster", AIP Conference Proceedings, Vol. No.2492,
Issue No., pp.-, 2023 |
|
Sakthivelmurugan, E., Senthilkumar, G., Kumar, S.M.V., Singh, H., "CELLULOSIC FIBER
EXTRACTED FROM ALSTONIA MACROPHYLLA SEED PODS AS A POTENTIAL REINFORCEMENT FOR
POLYMER COMPOSITES", Cellulose Chemistry and Technology, Vol. No.57, Issue No.45019,
pp.399-408, 2023 |
|
Sakthivelmurugan, E., Senthilkumar, G., Karthick, K.N., "Analysis of the impact of
circular economy over linear economy in the paper processing industry", Materials
Today: Proceedings, Vol. No.66, Issue No., pp.1446-1452, 2022 |
|
Vadivelu, P., Senthilkumar, G., Sivaraj, G., Lakshmanan, D., Uday Ranjan Goud, N.,
"Performance analysis of CD nozzle", Materials Today: Proceedings, Vol. No.64, Issue
No., pp.620-631, 2022 |
|
Jayakumar, N., Senthilkumar, G., Vignesh Kumar, S., "Investigation on surface defect
machining of AISI 4340 steel", Materials Today: Proceedings, Vol. No.66, Issue No.,
pp.1189-1195, 2022 |
|
Ramachandra Raju, K., Senthilkumar, G., Deepakraja, D., Vignesh, M., Surya, S.K.,
Vivek, G., "Experimental Investigation and Optimization of Machining Parameters of
Aluminum Composite Material", Springer Proceedings in Materials, Vol. No.5, Issue
No., pp.1035-1045, 2021 |
|
Jayakumar, N., Senthilkumar, G., Vignesh, M., Gokul, V., "Investigation on Normal
Hard Turning of AISI 4340 Steel", Springer Proceedings in Materials, Vol. No.5,
Issue No., pp.883-896, 2021 |
|
Ramachandra Raju, K., Senthilkumar, G., Arivu, Y., Vignesh, M., Thangeswaran, D.,
Vivek, G., "Experimental Studies on Milling Parameters for Al6061 Hybrid Metal
Matrix Composite", Springer Proceedings in Materials, Vol. No.5, Issue No.,
pp.575-588, 2021 |
|
Ramachandra Raju, K., Senthilkumar, G., Arivu, Y., Santhosh, T., Prasanth, T.,
Pradeep, R., "Experimental Investigation on Corrosion Behaviour of Aluminium Alloy
Nanoparticles Composite Material", Springer Proceedings in Materials, Vol. No.5,
Issue No., pp.1183-1190, 2021 |
|
Ramachandra Raju, K., Senthilkumar, G., Arivu, Y., Sathya, D., Sathya, A., Sandeep,
S., "Experimental Investigation on Tribological Behaviour of Alumina Nano Particles
Reinforced with Aluminium Alloy Composite Material", Springer Proceedings in
Materials, Vol. No.5, Issue No., pp.521-530, 2021 |
|
Jayakumar, N., Senthilkumar, G., Pradeep, A.D., "Effect of printing parameters of 3D
printed PLA parts on mechanical properties", Journal of Engineering Research
(Kuwait), Vol. No.9, Issue No., pp.-, 2021 |
|
Jayakumar, N., Senthilkumar, G., Vigneshwaran, S., Ajay Kumar, K.G., "Comparison of
stress distribution on dental implant with different abutment types", Materials
Today: Proceedings, Vol. No.45, Issue No., pp.7970-7979, 2021 |
|
Jayakumar, N., Senthilkumar, G., Aravinda Samy, S., Karthick, V., Renganathan, T.,
"Comparison of stress analysis for dental crown (FPD) for various materials",
Materials Today: Proceedings, Vol. No.45, Issue No., pp.7939-7950, 2021 |
|
Ramachandra Raju, K., Senthilkumar, G., "Investigation on properties of LM26 hybrid
composite material with ceramic reinforcements", Materials Today: Proceedings, Vol.
No.45, Issue No., pp.8086-8093, 2021 |
|
Sakthivelmurugan, E., Senthilkumar, G., Tajdeen, A., Manojkumar, S., "Application of
lean six sigma in reducing the material consumption at wards in a selected
healthcare unit", Materials Today: Proceedings, Vol. No.45, Issue No., pp.8011-8016,
2021 |
|
Sakthivelmurugan, E., Senthilkumar, G., Tajdeen, A., "Foraging behaviour analysis of
swarm robotics system using design of experiments", Materials Today: Proceedings,
Vol. No.45, Issue No., pp.1170-1174, 2021 |
|
Sakthivelmurugan, E., Senthilkumar, G., Ramakrishnan, A., Selvamuthukumaran, D.,
"Analysis of searching task using chain method in swarm robotics", International
Journal of Recent Technology and Engineering, Vol. No.7, Issue No.4, pp.66-70, 2019
|
|
Sakthivelmurugan, E., Senthilkumar, G., Prithiviraj, K.G., Tinu Devraj, K.R.,
"Foraging behavior analysis of swarm robotics system", MATEC Web of Conferences,
Vol. No.144, Issue No., pp.-, 2018 |
|
Senthilkumar, G., Balamurugan, K., Mohanraj, J., "Emission characteristics of
sunflower oil based bio-compatible blends of 2T oil", Journal of Scientific and
Industrial Research, Vol. No.74, Issue No.1, pp.48-51, 2015 |
|
Senthilkumar, G., Balamurugan, K., "Rheological, Wear and thermal stability studies
on sunflower oil with natural and nano metal additives", International Journal of
Applied Engineering Research, Vol. No.9, Issue No.23, pp.21739-21746, 2014 |
|
Senthilkumar, G., Balamurugan, K., "Process parameters optimization for synthesis of
methyl ester from sunflower oil using Taguchi technique", Carbon - Science and
Technology, Vol. No.6, Issue No.3, pp.22-29, 2014 |
|
Pradeep, A.D., Vivekanandhan, R., Rameshkumar, T., Sangaravadivel, P., "Design of
Hvac System for Beverage Industry", IOP Conference Series: Materials Science and
Engineering, Vol. No.1059, Issue No.1, pp.-, 2021 |
|
Tamilarasan, V.D., Rameshkumar, T., Saravanan, S., Ramakrishnan, A., "Experimental
Analysis of Forced Turbulent Convective Heat Transfer in a Circular Cross-Sectional
Tube With Al2O3-Water Nanofluid", Springer Proceedings in Materials, Vol. No.5,
Issue No., pp.1245-1257, 2021 |
|
Ramakrishnan, A., Rameshkumar, T., Rajamurugan, G., Sundarraju, G.,
Selvamuthukumaran, D., "Experimental investigation on mechanical properties of TIG
welded dissimilar AISI 304 and AISI 316 stainless steel using 308 filler rod",
Materials Today: Proceedings, Vol. No.45, Issue No., pp.8207-8211, 2021 |
|
Pradeep, A.D., Rameshkumar, T., Kumar, M., "Parameter optimization of SLS
Sinterstation 2500plususing GRA for better surface finish and dimensional accuracy",
Materials Today: Proceedings, Vol. No.45, Issue No., pp.8105-8109, 2021 |
|
Tamilarasan, V.D., Rameshkumar, T., Rajiev, R., Saravanan, S., Chandrasekaran, M.,
"A review on existing single cylinder 4 stroke petrol engine design analysis",
Materials Today: Proceedings, Vol. No.45, Issue No., pp.8064-8069, 2021 |
|
Pradeep, A.D., Rameshkumar, T., "Review on centrifugal casting of functionally
graded materials", Materials Today: Proceedings, Vol. No.45, Issue No., pp.729-734,
2021 |
|
Baskaran, S., Venkatasamy, R., Venkatesa Prabu, D., Ramesh Kumar, T., Meenakshi
Priya, B., "An Extensive Review on Befitting Batteries and Drives for Electric
Vehicles", Lecture Notes in Mechanical Engineering, Vol. No., Issue No., pp.851-865,
2021 |
|
Ramesh Kumar, T., Guruprakash, T., Nandha Kumar, P., Gokul, R., Ramakrishnan, A.,
"Study on Fibre Behaviour for Chemical Treatment and Fabrication of ABS-Based Fibre
Composite", Lecture Notes in Mechanical Engineering, Vol. No., Issue No.,
pp.103-120, 2021 |
|
Tamilarasan, V.D., Ramesh Kumar, T., "Fuel Injection Pressure and Combustion Chamber
Geometry Effects on the Performance and Emission Characteristics of Diesel Fueled CI
Engine with EGR", Lecture Notes in Mechanical Engineering, Vol. No., Issue No.,
pp.457-477, 2021 |
|
Yuvaraj, D., Rameshkumar, T., "CFD analysis of flow and thermal behaviour of ci
engine", International Journal of Mechanical and Production Engineering Research and
Development, Vol. No.9, Issue No., pp.299-308, 2019 |
|
Senthil Kumar, K.L., Ramesh Kumar, T., "An Integrated Approach to Optimize
Parameters in Electrochemical Machining Process", International Journal of Applied
Engineering Research, Vol. No.10, Issue No.3, pp.8297-8306, 2015 |
|
Rameshkumar, T., Rajendran, I., "Mechanical and tribological properties on Al-Sn-Si
alloy-based plain bearing material", Tribology Transactions, Vol. No.56, Issue No.2,
pp.268-274, 2013 |
|
Rameshkumar, T., Rajendran, I., Latha, A.D., "Investigation on the mechanical and
tribological properties of aluminium-tin based plain bearing material", Tribology in
Industry, Vol. No.32, Issue No.2, pp.3-10, 2010 |
|
Rohini, D., AmarKarthik, A., Abinaya, R., Mathan, A., Midhun, S., Dhushyanth, D.,
"Buckling analysis of a commercial aircraft wing box and its structural components
using Nastran patran", Materials Today: Proceedings, Vol. No.66, Issue No.,
pp.895-901, 2022 |
|
Subramaniyan, C., Prakash, K.B., Kalidasan, B., Bhuvanesh, N., Amarkarthik, A.,
"Exergy Analysis on Performance of Groundnut Solar Dryer with Forced Convection",
IOP Conference Series: Materials Science and Engineering, Vol. No.1059, Issue No.1,
pp.-, 2021 |
|
Vinoth Kumar, J., Amarkarthik, A., Santhosh, T., Solomon Allenjudah, R.,
Sundreswaran, U., "Performance Analysis of Automobile Radiator Using Tungsten
Trioxide Nano-Fluid", Springer Proceedings in Materials, Vol. No.5, Issue No.,
pp.1175-1181, 2021 |
|
Vinoth Kumar, J., Amarkarthik, A., Harish, R., Mugundan, S., Suriyaa, R.R.,
"Performance Analysis of Flat-Plate Solar Collector Using Tungsten Trioxide
Nanofluid", Springer Proceedings in Materials, Vol. No.5, Issue No., pp.831-840,
2021 |
|
Prakash, K.B., Subramaniyan, C., Chandrasekaran, M., Kalidasan, B., Amarkarthik, A.,
Manoj Kumar, P., Saravanakumar, S., "Experimental analysis of the vapour compression
refrigeration system with microchannel condenser using R134a and R1234yf
refrigerant", Journal of Engineering Research (Kuwait), Vol. No.9, Issue No., pp.-,
2021 |
|
Subramaniyan, C., Prakash, K.B., Amarkarthik, A., Kalidasan, B., Mohan Kumar, S.,
"Experimental and numerical evaluation on performance of potable water productivity
with rectangular fins basin triangular solar still", Journal of Engineering Research
(Kuwait), Vol. No.9, Issue No., pp.-, 2021 |
|
Prakash, K.B., Amarkarthik, A., Ravikumar, M., Manoj Kumar, P., Jegadheeswaran, S.,
"Optimizing Performance Characteristics of Blower for Combustion Process Using
Taguchi Based Grey Relational Analysis", Springer Proceedings in Materials, Vol.
No.5, Issue No., pp.155-163, 2021 |
|
Sivakumar, K., Kumar, P.M., Amarkarthik, A., Jegadheeswaran, S., Shanmugaprakash,
R., "Empirical modeling of material removal rate and surface roughness of OHNS steel
using Cu-TiB2Tool in EDM", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.2725-2729, 2021 |
|
Subramaniyan, C., Kalidasan, B., Bhuvanesh, N., Prakash, K.B., Amarkarthik, A.,
"Second law analysis on performance of double stage reciprocating air compressor
with inter cooler", Materials Today: Proceedings, Vol. No.45, Issue No., pp.652-657,
2021 |
|
Subramaniyan, C., Prakash, K.B., Kalidasan, B., Amarkarthik, A., Kumaresan, G.,
"Uncertainty analysis on performance of double stage reciprocating air compressor
with inter cooler", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.1233-1236, 2021 |
|
Subramaniyan, C., Prakash, S.I.V., Bhuvanesh, N., Kalidasan, B., Amarkarthik, A.,
"Study based on the reduction of lot time by implementing set production and FMS in
the traditional batch production system", Materials Today: Proceedings, Vol. No.45,
Issue No., pp.502-506, 2021 |
|
Prakash, R.S., Sivakumar, K., Jegadheeswaran, S., Amarkarthik, A., Mathankumar, P.,
"Parameters optimization of copper powder mixed dielectric and pure dielectric
medium in wire electrical discharge machining of AISI D3 steel", AIP Conference
Proceedings, Vol. No.2128, Issue No., pp.-, 2019 |
|
Prakash, K.B., Amarkarthik, A., Jegadheeswaran, S., Prakash, S., "Influence on
performance and emission characteristics of diesel engine by blending n-butanol and
n-pentanol as additives with diesel", Journal of Green Engineering, Vol. No.9, Issue
No.1, pp.60-75, 2019 |
|
Mathankumar, P., Sivakumar, K., Amarkarthik, A., Jegadheeswaran, S., "Effect of edm
process parameter on machining of ohns steel using CU-CRB 2 electrode",
International Journal of Mechanical and Production Engineering Research and
Development, Vol. No.9, Issue No., pp.309-315, 2019 |
|
Nagulan, S., Selvaraj, J., Arunachalam, A., Sivanandam, K., "Performance of
artificial neural network in prediction of heave displacement for nonbuoyant type
wave energy converter", IET Renewable Power Generation, Vol. No.11, Issue No.1,
pp.81-84, 2017 |
|
Amarkarthik, A., Sivakumar, K., "Investigation on modeling of non-buoyant body typed
point absorbing wave energy converter using Adaptive Network-based Fuzzy Inference
System", International Journal of Marine Energy, Vol. No.13, Issue No., pp.157-168,
2016 |
|
Santhosh, N., Baskaran, V., Amarkarthik, A., "A review on front end conversion in
ocean wave energy converters", Frontiers in Energy, Vol. No.9, Issue No.3,
pp.297-310, 2015 |
|
Chandrasekaran, S., Amarkarthik, A., Sivakumar, K., Selvamuthukumaran, D., Sidney,
S., "Experimental investigation and ANN modeling on improved performance of an
innovative method of using heave response of a non-floating object for ocean wave
energy conversion", Frontiers in Energy, Vol. No.7, Issue No.3, pp.279-287, 2013
|
|
Amarkarthik, A., Chandrasekaran, S., Sivakumar, K., Sinhmar, H., "Laboratory
experiment on using non-floating body to generate electrical energy from water
waves", Frontiers in Energy, Vol. No.6, Issue No.4, pp.361-365, 2012 |
|
Anandha Moorthy, A., Prakash, E., Madheswaran, S., Sasikumar, C., Vairavel, M.,
Girimurugan, R., "Experimental Investigations on Mechanical Properties and
Morphological Analysis of Carbon Steel Grade III Leaf Spring Steel", Springer
Proceedings in Materials, Vol. No.5, Issue No., pp.629-635, 2021 |
|
Anandha Moorthy, A., Girimurugan, R., Prakash, E., Madheswaran, S., Naveen Sankar,
A., Sriman, P., "Investigations on flexural performance of epoxy matrix composites
strengthened with chemically modified and unmodified banana fiber/Used Camellia
Sinensis (UCS) particles", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.8115-8119, 2021 |
|
Selvakumar, A., Anandha Moorthy, A., Sundaresan, S., Prakash, C., "Preparation, wear
resisting property and application of mwcnts/ni composite coating for sewing
needles", International Journal of Engineering and Advanced Technology, Vol. No.8,
Issue No.2, pp.143-147, 2018 |
|
Anandha Moorthy, A., Uvaraja, V.C., Natarajan, N., Palani, P.K., Dhanendran, N.,
Anantha Kumar, M., Satheesh, K.S., "Tribological Behavior of Aluminium Based MMC
Subjected to Various Temperature", International Journal of Applied Engineering
Research, Vol. No.9, Issue No.22, pp.14207-14215, 2014 |
|
Anandha Moorthy, A., Natarajan, N., Palani, P.K., Suresh, M., "Study on tribological
characteristics of self-lubricating AA2218-fly ash-white graphite composites",
International Journal of Engineering and Technology, Vol. No.5, Issue No.5,
pp.4193-4198, 2013 |
|
Anandha Moorthy, A., Natarajan, N., Palani, P.K., Manojkumar, M., "Microstructure
and dry sliding wear behavior of AA2218 based self-lubricating metal matrix
composites", International Review of Mechanical Engineering, Vol. No.7, Issue No.6,
pp.1142-1146, 2013 |
|
Kumar, M.A., Kumaresan, G., Sivagaminathan, M., Subramanian, R.S., Gururaj, C.,
"Experimental Performance Analysis Of Free And Forced Fully Developed Air Flow Green
House Solar Dryer Using Curry Leaves", E3S Web of Conferences, Vol. No.399, Issue
No., pp.-, 2023 |
|
Kumar, M.A., Kumaresan, G., Sivagaminathan, M., Rajakarunakaran, S., Subramanian,
R.S., "Performance Comparison of Tray, Bed and Integrated Drying Chamber in Closed
Loop Heat Pump Dryer for Bermuda Grass", E3S Web of Conferences, Vol. No.399, Issue
No., pp.-, 2023 |
|
Raja, T., Kumaresan, G., Pawar, N., "Parametric study on design and operating
variables influence on the performance of polymer electrolyte membrane fuel cell
(PEMFC) - A review", AIP Conference Proceedings, Vol. No.2492, Issue No., pp.-, 2023
|
|
Ramesh, C., Vijayakumar, M., Kumaresan, G., Selvanayagam, B.F., "Enhanced honey
badger optimization of performance analysis of evacuated tube heat pipe solar
collector integrated with PCM storage unit", Energy and Environment, Vol. No., Issue
No., pp.-, 2023 |
|
Antony Prabu, D., Jayakumar, K.S., Madhavan Pillai, E., Kumaresan, G., "OPTIMIZATION
OF GTAW PROCESS PARAMETERS OF DISSIMILAR AL-MG ALLOYS FOR ENHANCED JOINT STRENGTH -
TAGUCHI APPROACH", Archives of Metallurgy and Materials, Vol. No.68, Issue No.2,
pp.599-606, 2023 |
|
Suresh, K., Selvakumar, P., Kumaresan, G., Vijayakumar, M., Ravikumar, M., Jenita,
N.R., "A critical review on the effect of morphology, stability, and thermophysical
properties of graphene nanoparticles in nanolubricants and nanofluids", Journal of
Thermal Analysis and Calorimetry, Vol. No.148, Issue No.2, pp.451-472, 2023 |
|
Subramaniana, R.S., Kumaresan, G., Karthik, A.S., Sivaganes, K.C., Suryabalan, V.,
Guhan, A.R.V., "Analysis of modified shell and tube heat exchanger", AIP Conference
Proceedings, Vol. No.2527, Issue No., pp.-, 2022 |
|
Palanivel, V., Govindasamy, K., Arunachalam, G.K., "Optimization and prediction of
pulsating heat pipe compound parabolic solar collector performances by hybrid deep
belief network based bald eagle search optimizer", Environmental Progress and
Sustainable Energy, Vol. No.41, Issue No.2, pp.-, 2022 |
|
Hariprasad, P., Kumaresan, K., Vijayakumar, M., Kumaresan, G., "Surface and Wear
Investigation on Microwave Sintered Nitinol Composite", Materials Research, Vol.
No.25, Issue No., pp.-, 2022 |
|
Manikandan, R., Suresh, G., Abbas, S.M., Selvi, S., Begum, S.S., Vezhavendhan, R.,
Kumaresan, G., "An investigation on thermo-mechanical characterization of activated
carbon/coconut shell powder reinforced natural composites", Proceedings of the
Institution of Mechanical Engineers, Part E: Journal of Process Mechanical
Engineering, Vol. No., Issue No., pp.-, 2022 |
|
Kumar, P.M., Saminathan, R., Tharwan, M., Hadidi, H., Stalin, P.M.J., Kumaresan, G.,
Ram, S., Rinawa, M.L., Saravanakumar, P.T., Karthikeyan, K., Gebreyohannes, D.T.,
"Study on Sintered Wick Heat Pipe (SWHP) with CuO Nanofluids under Different
Orientation", Journal of Nanomaterials, Vol. No.2022, Issue No., pp.-, 2022 |
|
Vino, A., Kalaichelvan, K., Sajith, S., Kumaresan, G., "Studies on Flexural
Properties and Construction of Failure Mode Map for Copper Sandwich Panels",
Archives of Metallurgy and Materials, Vol. No.67, Issue No.4, pp.1371-1380, 2022
|
|
Raja, T., Kumaresan, G., "Numerical analysis of the influence of flow direction on
heat distribution performance of a PEM fuel cell with serpentine flow field deign",
Materials Today: Proceedings, Vol. No.66, Issue No., pp.838-844, 2022 |
|
Sivasubramanian, R., Kumaresan, G., Santhosh, N., Reshvanth, K.S., Syed Riyasudeen,
S., Shannon Medone, R., "Performance analysis of multipass tubes solar water heater
using nanofluids", Materials Today: Proceedings, Vol. No.66, Issue No.,
pp.1051-1055, 2022 |
|
Bhuvanesh, N., Kumaresan, G., Renuka, K., Mukeshu, R., Hakeem, M., Harish, V.N.N.,
"Investigation on development and performance analysis of water trash collector",
Materials Today: Proceedings, Vol. No.66, Issue No., pp.1216-1220, 2022 |
|
Reji, A.K., Kumaresan, G., Kaushik, N., Navin Karthi, V.S., Naveen, M.K., "Thermal
analysis of grooved heat pipe with eco-friendly refrigerant for low heat loads in
comparison to an ordinary thermosyphon", Materials Today: Proceedings, Vol. No.66,
Issue No., pp.878-882, 2022 |
|
Dhanapal, K., Raman, M., Kamatchi, R., Kumaresan, G., "Role of method of synthesis
on the size of flakes, dispersion stability and thermophysical properties of aqua
based reduced graphene oxide nanofluids", Journal of Thermal Analysis and
Calorimetry, Vol. No.144, Issue No.1, pp.233-243, 2021 |
|
Ashok Kumar, M., Kumaresan, G., Rajakarunakaran, S., "Investigation of Drying Rate
in Moringa Leaves Under Periodic and Continuous Airflow in Vacuum Condition",
Springer Proceedings in Materials, Vol. No.5, Issue No., pp.61-71, 2021 |
|
Bhuvanesh, N., Kumaresan, G., Subramaniyan, C., Sasikumar, C., Mukeshu, R.,
"Harvesting of Electricity from Handloom Weaving Machine Coupled with Dynamo",
Springer Proceedings in Materials, Vol. No.5, Issue No., pp.459-466, 2021 |
|
Kumaresan, G., Siva Shanmugam, N., Dhinakaran, V., "Preface", Springer Proceedings
in Materials, Vol. No.5, Issue No., pp.v-vi, 2021 |
|
Vijay, R., Vijayakumar, P., Kumaresan, G., Kumar, S.G., "Performance study of flat
plate solar collector integrated with twisted tape inserts", Materials Today:
Proceedings, Vol. No.45, Issue No., pp.1222-1226, 2021 |
|
Reji, A.K., Kumaresan, G., Mukundhan, A., Menon, A.S., Harikrishna, A.P., Parappadi,
J.J., "Experimental analysis of a four slope solar still augmented with a parabolic
reflector array with V-shaped mirror arrangement for pre-heating brackish water",
Materials Today: Proceedings, Vol. No.45, Issue No., pp.1834-1838, 2021 |
|
Bhuvanesh, N., Kumaresan, G., Rajasekaran, S., Adish, N.K., Saravanan, K.,
Subramaniyan, C., "Experimental modelling and analysis of semi-automated waste black
plastic materials sorter", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.2029-2033, 2021 |
|
Siva Subramanian, R., Kumaresan, G., Palanivel, R., Nishanth kalathil, P., Nirmal,
B., "Comparative performance analysis of parabolic trough solar collector by varying
absorber surface", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.1217-1221, 2021 |
|
Ashok Kumar, M., Kumaresan, G., Rajakarunakaran, S., "Experimental study of moisture
removal rate in Moringa leaves under vacuum pressure in closed-loop heat pump
dryer", Materials Today: Proceedings, Vol. No.45, Issue No., pp.1205-1210, 2021 |
|
Subramanian, R.S., Kumaresan, G., Ajith, R., Sabarivasan, U., Gowthamaan, K.K.,
Anudeep, S., "Performance analysis of modified solar still integrated with flat
plate collector", Materials Today: Proceedings, Vol. No.45, Issue No., pp.1382-1387,
2021 |
|
Reji, A.K., Kumaresan, G., Sarathi, A., Arasappa, G.P.S., Kumar, R.S., Matthew,
M.S., "Analysis of thermosiphon working with eco-friendly refrigerant under various
fill ratios", Materials Today: Proceedings, Vol. No.45, Issue No., pp.2618-2621,
2021 |
|
Reji, A.K., Kumaresan, G., Sarathi, A., Saiganesh Arasappa, G.P., Suriya Kumar, R.,
Shelton Matthew, M., "Performance analysis of thermosyphon heat pipe using aluminum
oxide nanofluid under various angles of inclination", Materials Today: Proceedings,
Vol. No.45, Issue No., pp.1211-1216, 2021 |
|
Sivasubramanian, R., Kumaresan, G., Kumar, N.N., Rajeshwaran, S.K., Jeyaseelan, R.,
Manikandan, V., Maran, B.M., "Design and analysis of air powered vehicle frame",
Materials Today: Proceedings, Vol. No.45, Issue No., pp.1366-1370, 2021 |
|
Vijayakumar, P., Kumaresan, G., Kumar, S.G., Eswaran, M., "A review on applications
of nanofluid in evacuated tube heat pipe integrated with compound parabolic
concentrator", Materials Today: Proceedings, Vol. No.45, Issue No., pp.1227-1232,
2021 |
|
Pandiaraj, S., Ayyasamy, T., Govindasamy, K., "Heat transfer augmentation using
water-in-glass evacuated tube coupled with parabolic trough in rack dryer in the
drying of capsicum frutescens", International Journal of Heat and Technology, Vol.
No.38, Issue No.4, pp.895-902, 2020 |
|
Vijayakumar, P., Kumaresan, G., Anish Kumar, S., Sudhagar, S., Vijay Chandran, G.R.,
Vishnu Adharsh, K.S., "Development of Solar Oven employed with Parabolic
Concentrator", IOP Conference Series: Earth and Environmental Science, Vol. No.312,
Issue No.1, pp.-, 2019 |
|
Vijayakumar, P., Kumaresan, G., Anish Kumar, S., Mohamed Faizal, U., Vijay Chandran,
G.R., Vishnu Adharsh, K.S., "Performance evaluation of compound parabolic
concentrator with evacuated tube heat pipe", IOP Conference Series: Earth and
Environmental Science, Vol. No.312, Issue No.1, pp.-, 2019 |
|
Reji, A.K., Kumaresan, G., Menon, A.S., Mukundhan, A., Harikrishna, A.P., Parappadi,
J.J., "Performance evaluation of a novel wick type four slope solar still coupled
with a parabolic reflector", International Journal of Innovative Technology and
Exploring Engineering, Vol. No.8, Issue No.8, pp.1678-1681, 2019 |
|
Kumaresan, G., Vijayakumar, P., Ravikumar, M., Kamatchi, R., Selvakumar, P.,
"Experimental study on effect of wick structures on thermal performance enhancement
of cylindrical heat pipes", Journal of Thermal Analysis and Calorimetry, Vol.
No.136, Issue No.1, pp.389-400, 2019 |
|
Bhuvanesh, N., Kumaresan, G., Subramaniyan, C., "Performance and emission
characteristics analysis of di-diesel engine fuelled with calophyllum inophyllum
methyl ester diesel blend", International Journal of Mechanical and Production
Engineering Research and Development, Vol. No.9, Issue No., pp.171-176, 2019 |
|
Kamatchi, R., Kumaresan, G., "Investigations on pool boiling critical heat flux,
transient characteristics and bonding strength of heater wire with aqua based
reduced graphene oxide nanofluids", Chinese Journal of Chemical Engineering, Vol.
No.26, Issue No.3, pp.445-454, 2018 |
|
Vijayakumar, M., Navaneethakrishnan, P., Kumaresan, G., Kamatchi, R., "A study on
heat transfer characteristics of inclined copper sintered wick heat pipe using
surfactant free CuO and Al2O3 nanofluids", Journal of the Taiwan Institute of
Chemical Engineers, Vol. No.81, Issue No., pp.190-198, 2017 |
|
Vijayakumar, M., Navaneethakrishnan, P., Kumaresan, G., "Thermal characteristics
studies on sintered wick heat pipe using CuO and Al2O3 nanofluids", Experimental
Thermal and Fluid Science, Vol. No.79, Issue No., pp.25-35, 2016 |
|
Venkatachalapathy, S., Kumaresan, G., Suresh, S., "Performance analysis of
cylindrical heat pipe using nanofluids - An experimental study", International
Journal of Multiphase Flow, Vol. No.72, Issue No., pp.188-197, 2015 |
|
Kumaresan, G., Venkatachalapathy, S., Asirvatham, L.G., "Experimental investigation
on enhancement in thermal characteristics of sintered wick heat pipe using CuO
nanofluids", International Journal of Heat and Mass Transfer, Vol. No.72, Issue No.,
pp.507-516, 2014 |
|
Kumaresan, G., Venkatachalapathy, S., Asirvatham, L.G., Wongwises, S., "Comparative
study on heat transfer characteristics of sintered and mesh wick heat pipes using
CuO nanofluids", International Communications in Heat and Mass Transfer, Vol. No.57,
Issue No., pp.208-215, 2014 |
|
Singh, P., Venkatachalapathy, S., Kumaresan, G., "Heat transfer studies on
condensation using heat pipes", Applied Mechanics and Materials, Vol. No.592-594,
Issue No., pp.1617-1621, 2014 |
|
Kumaresan, G., Venkatachalapathy, S., Naik, I.C., "An experimental study on
improvement in thermal efficiency of mesh wick heat pipe", Applied Mechanics and
Materials, Vol. No.592-594, Issue No., pp.1423-1427, 2014 |
|
Sangaravadivel, P., Sudarvannan, V., Gukan, R., Pradeep, A.D., "Investigation of
mechanical properties on AA7075 matrix composites reinforced with tungsten disulfide
particles", Materials Today: Proceedings, Vol. No.45, Issue No., pp.7959-7964, 2021
|
|
Sangaravadivel, P., Rajamurugan, G., Krishnasamy, P., "Significance of Tungsten
disulfide on the mechanical and machining characteristics of phosphor bronze metal
matrix composite", Advanced Composites Letters, Vol. No.29, Issue No., pp.1-13, 2020
|
|
Sangaravadivel, P., Natarajan, N., Krishnaraj, V., Rajalingam, S., "An experimental
investigation of dry sliding wear behaviour on phosphor bronze/WS2 particle
reinforced composites", International Journal of Applied Engineering Research, Vol.
No.9, Issue No.23, pp.19279-19285, 2014 |
|
Sankaravadivel, P., Babu, N., Gemsprim, M.S., Natarajan, N., "Wear characteristics
of Phosphor-Bronze/Boron carbide particulate composites", Applied Mechanics and
Materials, Vol. No.550, Issue No., pp.48-52, 2014 |
|
Jayahariharapranav, P., Dinesh, D., Mathankumar, P., Rajamurugan, G., Jayakumar, N.,
"Effect of Titanium Di-Boride/Copper (TiB2-Cu) Electrode on the Machinability of
OHNS Steel by EDM Process", IOP Conference Series: Materials Science and
Engineering, Vol. No.1059, Issue No.1, pp.-, 2021 |
|
Santhoshkumar, S., Senthil Kumar, K.L., Kalil Rahiman, M., Mathankumar, P., "A
review on friction stir welding of aluminium alloys and the effects on tool
geometry", IOP Conference Series: Materials Science and Engineering, Vol. No.764,
Issue No.1, pp.-, 2020 |
|
Kumar, P.M., Sivakumar, K., Jayakumar, N., "Surface Modification on OHNS Steel Using
Cu-CrB2 Green Compact Electrode in EDM", Materials Today: Proceedings, Vol. No.5,
Issue No.9, pp.17389-17395, 2018 |
|
Vadivel Vivek, V., Boopathi, C., Natarajan, N., L.Pradeesh, E., Pravin, M.C.,
"Exploration of mechanical properties of jute fiber and copper wire reinforced
hybrid polymer composites", Materials Today: Proceedings, Vol. No.66, Issue No.,
pp.707-711, 2022 |
|
Yuvaraj, K., Oorappan, G.M., Megavarthini, K.K., Pravin, M.C., Adharsh, R., Ashwath
Kumaran, M., "Design and Development of An Application for Database Maintenance in
Inventory Management System Using Tkinter and Sqlite Platform", IOP Conference
Series: Materials Science and Engineering, Vol. No.995, Issue No.1, pp.-, 2020 |
|
Pravin, M.C., Mukilan, M., Vishnu Prakash, G., Nithish, P., Monish Kanna, B.,
Logesh, E., "Predicting the Emissive Characteristics of an IC Engine Using DNN", IOP
Conference Series: Materials Science and Engineering, Vol. No.995, Issue No.1, pp.-,
2020 |
|
Vadivel Vivek, V., Pradeesh, E.L., Natarajan, N., Pravin, M.C., Raghavendra Prabhu,
S., "Development of a system to assist in library to automate the book handling
process", IOP Conference Series: Materials Science and Engineering, Vol. No.995,
Issue No.1, pp.-, 2020 |
|
Pravin, M.C., Karthikeyan, S., Sathyabama, B., Synthiya Vinothini, D., "Texture and
morphology based conductivity analysis of fuel cell-bipolar plate using scanning
electron microscopic images", Indian Journal of Engineering and Materials Sciences,
Vol. No.24, Issue No.4, pp.261-269, 2017 |
|
Dinesh, D., Nithin Mowshik, A., Meyyappan, M., Kowtham, M., "Analysis of universal
gas leak detector of hazardous gases using IOT", Materials Today: Proceedings, Vol.
No.66, Issue No., pp.1044-1050, 2022 |
|
Dinesh, D., Megalingam, A., "Dry Sliding Friction and Wear Behaviour of Leaded Tin
bronze for Bearing and Bushing Application", Archives of Metallurgy and Materials,
Vol. No.66, Issue No.4, pp.1095-1104, 2021 |
|
Mathan Kumar, P., Dinesh, D., Sundarraju, G., Madheswaran, S., Perumal, K.,
"Modelling of Surface Roughness in Wire-EDM Using Response Surface Methodology
Technique", Springer Proceedings in Materials, Vol. No.5, Issue No., pp.791-799,
2021 |
|
Moorthy, A.A., Nanjappan, N., Ayyanar, C.B., Dinesh, D., "in vitro Cytotoxicity
examination of the seashell and fish scale substances embedded with high degree of
compactness in polyethylene composite", Journal of Engineering Research (Kuwait),
Vol. No.9, Issue No., pp.-, 2021 |
|
Rajamurugan, G., Ghosh, P.K., Krishnasamy, P., Dinesh, D., Vinukumar, S.M., "Thermal
and Weld Bead Characteristics of Bead-on-Plate PGMA Welding of Dissimilar ASS Bead
on HSLA Plate", Transactions of the Indian Institute of Metals, Vol. No.74, Issue
No.1, pp.89-106, 2021 |
|
Rajamurugan, G., Ghosh, P.K., Prabu, K., Dinesh, D., Vinukumar, S.M., "Dendrite
Morphological Analysis on SMA, GMA, and PGMA Welding of Dissimilar 304LN Austenitic
Stainless Steel and Micro-alloyed Steel", Transactions of the Indian Institute of
Metals, Vol. No.73, Issue No.3, pp.595-611, 2020 |
|
Kishore, P., Kumar, P.M., Dinesh, D., "Wear analysis of Al 5052 alloy with varying
percentage of tungsten carbide", AIP Conference Proceedings, Vol. No.2128, Issue
No., pp.-, 2019 |
|
Dinesh, D., Megalingam, A., Rajamurugan, G., Arundeep, M., Tajdeen, A., "Evaluation
of microstructure and tribological characterization of friction stir processed Al
6063 / B4C+SiO2 composites", AIP Conference Proceedings, Vol. No.2128, Issue No.,
pp.-, 2019 |
|
Rajamurugan, G., Dinesh, D., Ramakrishnan, A., "A comparative study on grain size
and HAZ width of GMA and PGMA welds of dissimilar ass and HSLA steel plates",
International Journal of Mechanical and Production Engineering Research and
Development, Vol. No.8, Issue No.Special Issue 7, pp.1641-1649, 2018 |
|
Dinesh, D., Baskaran, V., Elamathiyan, K., Rajamurugan, G., Praveenkumar, M.,
Saravana Kumar, S., Aathithya, V.S., "Experimental evaluation on friction stir
processing of Al-6063 6063 with addition of B4C and Sio2 reinforcement",
International Journal of Applied Engineering Research, Vol. No.10, Issue No.32
Special Issue, pp.23948-23951, 2015 |
|
Amirtharaj, D., Rajamurugan, G., Sivachidambaram, S., Dinesh, D., "Wear and
microstructural characteristics of friction stir processed aluminium 6063",
International Journal of Applied Engineering Research, Vol. No.10, Issue No.62
Special Issue, pp.216-220, 2015 |
|
Amirtharaj, D., Rajamurugan, G., Sivachidambaram, S., Dinesh, D., "Effect of tool
geometry on surface modification of aluminium 6063 by friction stir processing",
ARPN Journal of Engineering and Applied Sciences, Vol. No.10, Issue No.12,
pp.5391-5394, 2015 |
|
Velmurugan, S., Sivakumar, K., Ramabalan, S., "Impact of mixed tolerance combination
on the geometric position and torques of a four-bar kinematic chain using genetic
algorithm", Materials Today: Proceedings, Vol. No.66, Issue No., pp.1056-1065, 2022
|
|
Velmurugan, S., Sivakumar, K., "Minimization of Performance Error for A Planar Robot
by Tolerance Optimization using an Evolutionary Algorithm", IOP Conference Series:
Materials Science and Engineering, Vol. No.1059, Issue No.1, pp.-, 2021 |
|
Arun, G.V., Kishore Kumar, K., Velmurugan, S., "Structural Analysis of Chassis using
AISI 4130 and AA 7068", IOP Conference Series: Materials Science and Engineering,
Vol. No.1059, Issue No.1, pp.-, 2021 |
|
Roshan Rino, B., Pranesh Kumar, M., Velmurugan, S., "Design Enhancement and Thermal
Analysis of Disc Brake", IOP Conference Series: Materials Science and Engineering,
Vol. No.1059, Issue No.1, pp.-, 2021 |
|
Nandagopal, M., Sivakumar, K., Sengottuvelan, M., Velmurugan, S., "Optimization of
Process Parameters to Reduce the Green Sand Casting Defects", Springer Proceedings
in Materials, Vol. No.5, Issue No., pp.655-661, 2021 |
|
Nandagopal, M., Sivakumar, K., Velmurugan, S., Durairaj, R.B., Mageshwaran, G.,
"Multi-objective optimization of western bentonite (Al2h2 na2o13 si4)-blended green
sand casting process parameters to improve mould quality", Transactions of the
Canadian Society for Mechanical Engineering, Vol. No.45, Issue No.1, pp.110-119,
2021 |
|
Velmurugan, S., Sivakumar, K., Mathiyazhagan, K., Balamurugan, C., "Parametric
tolerance impact on algebraic position and joint torques of a three link planar
manipulator using evolutionary techniques", Journal of Scientific and Industrial
Research, Vol. No.79, Issue No.9, pp.814-818, 2020 |
|
Nandagopal, M., Sivakumar, K., Sengottuvelan, M., Velmurugan, S., "Review on ferrous
and non-ferrous casting defects and their analysis", AIP Conference Proceedings,
Vol. No.2128, Issue No., pp.-, 2019 |
|
Velmurugan, S., Arunkumar, S., Nandagopal, M., Sivakumar, K., "Less effort front
operated longitudinal table movement of milling machine using gearless transmission
system", International Journal of Mechanical and Production Engineering Research and
Development, Vol. No.9, Issue No., pp.162-170, 2019 |
|
Boopathi, S., Sureshkumar, M., Sathiskumar, S., "Parametric Optimization of LPG
Refrigeration System Using Artificial Bee Colony Algorithm", Lecture Notes in
Mechanical Engineering, Vol. No., Issue No., pp.97-105, 2023 |
|
Saravanan, M., Vasanth, M., Boopathi, S., Sureshkumar, M., Haribalaji, V.,
"Optimization of Quench Polish Quench (QPQ) Coating Process Using Taguchi Method",
Key Engineering Materials, Vol. No.935, Issue No., pp.83-91, 2022 |
|
Jeyakymar, M., Munusami, V., Shanmugam, P., Boopalan, N., Boopathi, S., Sureshkumar,
M., "An investigation on wear loss and hardness of nitro-carburizing coated
stainless-steel grade-316", Materials Today: Proceedings, Vol. No.66, Issue No.,
pp.1398-1404, 2022 |
|
Gunasekaran, K., Boopathi, S., Sureshkumar, M., "ANALYSIS OF A CRYOGENICALLY COOLED
NEAR-DRY WEDM PROCESS USING DIFFERENT DIELECTRICS [ANALIZA KRIOGENSKO OHLAJENEGA
SKORAJ POPOLNO SUHEGA PROCESA EROZIJE Z UPORABO RAZLIČNIH DIELEKTRIKOV]", Materiali
in Tehnologije, Vol. No.56, Issue No.2, pp.179-186, 2022 |
|
Sathiskumar, S., Sureshkumar, M., Kumar, R.V.R., Aswathaman, R., Dhavaneeswaran, N.,
"Effects of gasoline fumigation on the performance and emission characteristics of
CI engine fuelled with mahua biodiesel", AIP Conference Proceedings, Vol. No.2317,
Issue No., pp.-, 2021 |
|
Sureshkumar, M., Madan Mohan, S., "Review on Manufacturing and Development of Ni-Ti
Shape Memory Alloys", Springer Proceedings in Materials, Vol. No.5, Issue No.,
pp.859-865, 2021 |
|
Deepankumar, S., Saravanan, B., Yuvaraj, D., Ramesh Kumar, T., Sureshkumar, M.,
Simmon, K.V., "Simulation and Analysis with Material Optimization of Automobile
Suspension Using Multi-body Dynamic", Springer Proceedings in Materials, Vol. No.5,
Issue No., pp.309-320, 2021 |
|
Sampath, B., Sureshkumar, M., Yuvaraj, T., Velmurugan, D., "Experimental
investigations on eco-friendly helium-mist near-dry wire-cut edm of m2-hss
material", Materials Research Proceedings, Vol. No.19, Issue No., pp.175-180, 2021
|
|
Sureshkumar, M., Chinnasamy, S.G.V., "Investigation of a tool and workpiece machined
using a nickel-nanocoated insert", Materiali in Tehnologije, Vol. No.52, Issue No.2,
pp.171-175, 2018 |
|
Mohanakrishnan, D., Sureshkumar, M., "A comparative analysis of orientation on the
shape memory effect of fabric reinforced shape memory polymer composites", Materials
Science Forum, Vol. No.830-831, Issue No., pp.529-532, 2015 |
|
Sureshkumar, M., Tamilselvam, P., Kumaravelan, R., Dharmalingam, R., "Design,
fabrication, and analysis of a hybrid FIBER composite monoleaf spring using carbon
and E-glass fibers for automotive suspension applications", Mechanics of Composite
Materials, Vol. No.50, Issue No.1, pp.115-122, 2014 |
|
Sundar Raju, G., Sivakumar, K., Ramakrishnan, A., Selvamuthukumaran, D., Sakthivel
Murugan, E., "Design and fabrication of sanitizer sprinkler robot for covid-19
hospitals", IOP Conference Series: Materials Science and Engineering, Vol. No.1059,
Issue No.1, pp.-, 2021 |
|
Sundar Raju, G., Sivakumar, K., Ragu Nathan, S., "Influence of tool rotational speed
on the mechanical and microstructural properties of AISI 316 Austenitic stainless
steel friction stir welded joints", Materials Research Express, Vol. No.6, Issue
No.12, pp.-, 2019 |
|
Eswaran, P., Tamilmani, B., Rarity Karna, D., Mohamed Arif, A., Susheel, R.N.,
Saravana Kumar, B., Ramachandra Raju, K., "Triphibian - An urban future
transportation system", IOP Conference Series: Materials Science and Engineering,
Vol. No.764, Issue No.1, pp.-, 2020 |
|
Sathishkumar, C., Dineshkumar, G., Karthikeyan, K.S., Prasanna, P., "Development of
Areca Nut Climbing and Harvesting Machine with Pesticide", IOP Conference Series:
Materials Science and Engineering, Vol. No.1059, Issue No.1, pp.-, 2021 |
|
Dinesh Kumar, G., Karthikeyan, K.S., Sathishkumar, C., "Study and Testing of
Pneumatic Control of Ball Valve Using Actuator", Springer Proceedings in Materials,
Vol. No.5, Issue No., pp.1199-1211, 2021 |
|
Sathishkumar, C., Selvakumar, J., Venkatesh, S.R., Thoufeekahamed, M., "Design of
Compact Paper Counting Machine", Springer Proceedings in Materials, Vol. No.5, Issue
No., pp.987-992, 2021 |
|
Kothai, A., Sathishkumar, C., Muthupriya, R., Sankar, K.S., Dharchana, R.,
"Experimental investigation of textile dyeing wastewater treatment using aluminium
in electro coagulation process and Fenton's reagent in advanced oxidation process",
Materials Today: Proceedings, Vol. No.45, Issue No., pp.1411-1416, 2021 |
|
Sathiyamoorthy, R., Soorya Prakash, K., Sathishkumar, C., Gopal, P.M.,
"Investigation on SiCf / SiC Composites with SiBN Interface Processed through
Chemical Vapor Infiltration", Materials Today: Proceedings, Vol. No.3, Issue No.10,
pp.4220-4225, 2016 |
|
Tajdeen, A., Megalingam, A., Sivanesh Prabhu, M., Wasim Khan, M., "Role of Tungsten
Disulfide Particles on the Microstructure, Mechanical, and Tribological Behaviors of
Friction Stir-Processed Magnesium-Based Composite", Journal of Tribology, Vol.
No.145, Issue No.1, pp.-, 2023 |
|
Wasim Khan, M., Elayaperumal, A., Sivanesh Prabhu, M., Tajdeen, A., "Bioshells and
Calcium-Based Composite Coating for Tribology Applications", Composite and Composite
Coatings: Mechanical and Tribology Aspects, Vol. No., Issue No., pp.243-250, 2022
|
|
Tajdeen, A., Wasim Khan, M., Kamal Basha, K., Sakthivelmurugan, E., NeerajaKoppula,
"Experimental investigation and optimization of EDM process parameters on EN31 steel
using genetic algorithm", Materials Today: Proceedings, Vol. No.64, Issue No.,
pp.821-827, 2022 |
|
Tajdeen, A., Kamal Basha, K., Roshan Shandres, C., Sandeeprajkumar, S., Saddam
Hussain, S., Sanjay, R., "Wear and Mechanical Behaviour of Magnesium AZ31 alloy
Reinforced with MoS2through Friction Stir Processing for Aerospace Applications",
IOP Conference Series: Materials Science and Engineering, Vol. No.1059, Issue No.1,
pp.-, 2021 |
|
Tajdeen, A., Soundrapandian, E., Sakthivelmurugan, E., Nachimuthu, S., Dinesh, P.,
Praveenkumar, S., "Design and Automation of Shell Facing Machine", Springer
Proceedings in Materials, Vol. No.5, Issue No., pp.291-300, 2021 |
|
Vivekkumar, P., Soundrapandian, E., Tajdeen, A., Prashanth, T., "Experimental Study
of Electrochemical Micromachining on Titanium (Ti–6Al–4V) Alloy", Springer
Proceedings in Materials, Vol. No.5, Issue No., pp.301-308, 2021 |
|
Tajdeen, A., Megalingam, A., "OPTIMIZATION OF OUTPUT RESPONSES DURING EDM OF AZ91
MAGNESIUM ALLOY USING GREY RELATIONAL ANALYSIS AND TOPSIS", Archives of Metallurgy
and Materials, Vol. No.66, Issue No.4, pp.1105-1113, 2021 |
|
Soundrapandian, E., Tajdeen, A., Basha, K.K., Vivekkumar, P., "Machining of Metal
Matrix Composite Using Abrasive Water Jet Machine", Springer Proceedings in
Materials, Vol. No.5, Issue No., pp.277-290, 2021 |
|
Tajdeen, A., Sakthivelmurugan, E., Wasim Khan, M., Praveen Kumar, S., Praveenkumar,
M., Vidhyaa Prakash, S., "Optimization of machining parameters in Electric Discharge
Machining of Magnesium and Aluminium by Taguchi Technique", IOP Conference Series:
Materials Science and Engineering, Vol. No.764, Issue No.1, pp.-, 2020 |
|
Radha Krishnan, B., Theerkka Tharisanan, R., Arumuga Prabu, V., Immanuel, P.,
Ramakrishnan, A., "Experimental investigation of mechanical properties of
Al7075-Al2O3-B4C composite via stir route", Materials Today: Proceedings, Vol.
No.64, Issue No., pp.1721-1724, 2022 |
|
Ramakrishnan, A., Ramesh Kumar, T., Rajamurugan, G., Tamilarasan, V.D., Vijayakumar,
M., "Experimental Investigation on Mechanical Properties of TIG Welded Dissimilar
AISI 304L and AISI 316L Stainless Steel", Springer Proceedings in Materials, Vol.
No.5, Issue No., pp.801-807, 2021 |
|
Ramakrishnan, A., Radha Krishnan, B., "Prediction of surface roughness in CNC
turning process using adaptive neural fuzzy inference system", Journal of
Engineering Research (Kuwait), Vol. No.9, Issue No., pp.-, 2021 |
|
Sasikumar, C., Sundaresan, R., Medona, C.M., Ramakrishnan, A., "Corrosion study on
AA-TIG welding of duplex stainless steel", Materials Today: Proceedings, Vol. No.45,
Issue No., pp.3383-3385, 2021 |
|
Sasikumar, C., Kanna, P.G., Sundaresan, R., Ramakrishnan, A., "Experimental analysis
of Al-AlN-B4C hybrid composite material for automobile disk brake", Materials Today:
Proceedings, Vol. No.45, Issue No., pp.3674-3677, 2021 |
|
Ravichandran, S., Vengatesan, E., Ramakrishnan, A., "Synthesis and dynamic
mechanical analysis of fiber reinforced low-density polyethylene hybrid polymer
composites", Materials Today: Proceedings, Vol. No.27, Issue No., pp.177-180, 2020
|
|
Ramakrishnan, A., Rajamurugan, G., Krishnasamy, P., "Emission and tribological
studies on nano CuO/jatropha methyl ester/synthetic mineral oil in a two-stroke
engine", SAE Technical Papers, Vol. No.2019, Issue No., pp.-, 2019 |
|
Rajamurugan, G., Deepankumar, S., Ramakrishnan, A., Krishnasamy, P., Dhanabalan, D.,
"Corrosion characteristics on friction stir welding of dissimilar AA2014/AA6061
alloy for automobile application", SAE Technical Papers, Vol. No.2019, Issue No.,
pp.-, 2019 |
|
Rajesh Kanna, P., Anbumalar, V., Krishnakumar, M., Ramakrishnan, A., Allwyn
Pushparaj, S., Santhosh Kumar, A.V., "Numerical Investigation of Mixed Convection
Heat Transfer from Block Mounted on a Cavity", Arabian Journal for Science and
Engineering, Vol. No.39, Issue No.12, pp.9187-9204, 2014 |
|
Sakthivelmurugan, E., Senthil Kumar, G., Vinu Kumar, S.M., Singh, H., "Dynamic
mechanical and drilling behavior of Alstonia macrophylla fiber-reinforced
polypropylene (PP) composites", Journal of the Brazilian Society of Mechanical
Sciences and Engineering, Vol. No.45, Issue No.8, pp.-, 2023 |
|
Kumar, S.M.V., Sasikumar, C., Sakthivelmurugan, E., Rishi, J.P., "EFFECT OF
SALT-WATER AGING ON THE MECHANICAL PROPERTIES OF FLAX-WOVEN FABRIC-REINFORCED EPOXY
COMPOSITES [VPLIV STARANJA S SLANO VODO NA MEHANSKE LASTNOSTI PLATNENEGA MATERIALA
OJAČANEGA Z EPOKSIDNIMI KOMPOZITI]", Materiali in Tehnologije, Vol. No.55, Issue
No.6, pp.851-859, 2021 |
|
Devaenthiran, P., Murugesan, K., Palaniappan, S., "Experimental investigation and
Analysis on effect of fiber orientation on mechanical properties of synthetic and
natural fiber reinforced hybrid composite", Journal of Engineering Research
(Kuwait), Vol. No.9, Issue No., pp.-, 2021 |
|
Selvamuthukumaran, D., Babu, N., Gemsprim, M.S., Aravindkumar, N., "CFD analysis of
axisymmetry cylinder in heave", AIP Conference Proceedings, Vol. No.2527, Issue No.,
pp.-, 2022 |
|
Rajamanickam, A.K., Uvaraja, V.C., Selvamuthukumaran, D., Surya, K., "Fabrication of
Paddy Transplanter Machine", IOP Conference Series: Materials Science and
Engineering, Vol. No.1059, Issue No.1, pp.-, 2021 |
|
Malathi, T., Selvamuthukumaran, D., Diwaan Chandar, C.S., Niranjan, V., Swashthika,
A.K., "An Experimental Performance Analysis on Robotics Process Automation (RPA)
with Open Source OCR Engines: Microsoft Ocr and Google Tesseract OCR", IOP
Conference Series: Materials Science and Engineering, Vol. No.1059, Issue No.1,
pp.-, 2021 |
|
Kumar Rajamanickam, A., Uvaraja, V.C., Selvamuthukumaran, D., Shanmugasundaram, A.,
"Experimental Investigation on Production of Jatropha Methyl Ester", IOP Conference
Series: Materials Science and Engineering, Vol. No.764, Issue No.1, pp.-, 2020 |
|
Prakash, T., Jayakumar, N., Kumar, V.M., Karthick, P., Mutharasu, A., Kumar, A.N.,
"Design and Analysis of 3D Printable Prosthetic Foot", Lecture Notes in Mechanical
Engineering, Vol. No., Issue No., pp.637-655, 2022 |
|
Kumar, P.M., Sivakumar, K., Jayakumar, N., "Multiobjective optimization and analysis
of copper–titanium diboride electrode in EDM of monel 400™ alloy", Materials and
Manufacturing Processes, Vol. No.33, Issue No.13, pp.1429-1437, 2018 |
|
Kumar, R.D., Prakash, K., Sundari, P.A., Sathya, S., "A Hybrid Machine Learning
Model for Solar Power Forecasting", E3S Web of Conferences, Vol. No.387, Issue No.,
pp.-, 2023 |
|
Prakash, K.B., Almeshaal, M., Pasupathi, M.K., Chinnasamy, S., Saravanakumar, S.,
Rajesh Ruban, S., "Hybrid PV/T Heat Pump System with PCM for Combined Heating,
Cooling and Power Provision in Buildings", Buildings, Vol. No.13, Issue No.5, pp.-,
2023 |
|
Prakash, K.B., Pasupathi, M.K., Chinnasamy, S., Saravanakumar, S., Palaniappan, M.,
Alasiri, A., Chandrasekaran, M., "Energy and Exergy Enhancement Study on PV Systems
with Phase Change Material", Sustainability (Switzerland), Vol. No.15, Issue No.4,
pp.-, 2023 |
|
Prakash, K., Parimala, M., Garg, H., Riaz, M., "Lifetime prolongation of a wireless
charging sensor network using a mobile robot via linear Diophantine fuzzy graph
environment", Complex and Intelligent Systems, Vol. No.8, Issue No.3, pp.2419-2434,
2022 |
|
Yaknesh, S., Tharwan, M., Saminathan, R., Rajamurugu, N., Prakash, K.B., Ankit,
Pasupathi, M.K., Sarojwal, A., Gebreyohannes, D.T., "Mechanical and Microstructural
Investigation on AZ91B Mg Alloys with Tool Tilt Variation by Friction Stir Welding",
Advances in Materials Science and Engineering, Vol. No.2022, Issue No., pp.-, 2022
|
|
Saravanakumar, S., Kalaiselvan, K., Ramesh, M., Prakash, K.B., Sundar Rajan, A.,
Subash Chandru, T., Aravinth, M.S., "Design and comparison of the strength of
propeller shaft for truck made of AA2024, AA7068, and Ti-6Al-4V using ANSYS",
Materials Today: Proceedings, Vol. No.69, Issue No., pp.1442-1454, 2022 |
|
Saravanakumar, S., Kalaiselvan, K., Prakash, K.B., Parkunam, M., Niranjan, S.,
Dharanish, N., Akash, R., "Mechanical behaviour and microstructure analysis of
aluminium 2024 and 5052 using friction stir welding", Materials Today: Proceedings,
Vol. No.69, Issue No., pp.1437-1441, 2022 |
|
Chandrasekaran, M., Prakash, K.B., Subramaniyan, C., Santhosh, N., Tamilarasan,
V.D., "Experimental investigation on heavy duty engine radiator using cerium oxide
nano fluid", Materials Today: Proceedings, Vol. No.66, Issue No., pp.1497-1500, 2022
|
|
Parimala, M., Broumi, S., Prakash, K., Topal, S., "Bellman–Ford algorithm for
solving shortest path problem of a network under picture fuzzy environment", Complex
and Intelligent Systems, Vol. No.7, Issue No.5, pp.2373-2381, 2021 |
|
Islam, F.R., Lallu, A., Mamun, K.A., Prakash, K., Roy, N.K., "Power Quality
Improvement of Distribution Network Using BESS and Capacitor Bank", Journal of
Modern Power Systems and Clean Energy, Vol. No.9, Issue No.3, pp.625-632, 2021 |
|
Prakash, K.B., Fageehi, Y.A., Saminathan, R., Manoj Kumar, P., Saravanakumar, S.,
Subbiah, R., Arulmurugan, B., Rajkumar, S., "Influence of Fiber Volume and Fiber
Length on Thermal and Flexural Properties of a Hybrid Natural Polymer Composite
Prepared with Banana Stem, Pineapple Leaf, and S-Glass", Advances in Materials
Science and Engineering, Vol. No.2021, Issue No., pp.-, 2021 |
|
Prakash, K.B., Subramaniayan, C., Chandrasekaran, M., Manoj Kumar, P.,
Saravanakumar, S., "Development of mathematical model to study the effect of indoor
air quality parameters and optimization using response surface methodology",
Materials Today: Proceedings, Vol. No.45, Issue No., pp.8195-8198, 2021 |
|
Kumar, P.M., Anandkumar, R., Mylsamy, K., Prakash, K.B., "Experimental investigation
on thermal conductivity of nanoparticle dispersed paraffin (NDP)", Materials Today:
Proceedings, Vol. No.45, Issue No., pp.735-739, 2021 |
|
Saravanakumar, S., Gopalakrishnan, S., Kalaiselvan, K., Prakash, K.B.,
"Microstructure and mechanical properties of Cu/RHA composites fabricated by
friction stir processing", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.879-883, 2021 |
|
Kumar, P.M., Mylsamy, K., Prakash, K.B., Nithish, M., Anandkumar, R., "Investigating
thermal properties of Nanoparticle Dispersed Paraffin (NDP) as phase change material
for thermal energy storage", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.745-750, 2021 |
|
Manoj Kumar, P., Sudarvizhi, D., Prakash, K.B., Anupradeepa, A.M., Boomiha Raj, S.,
Shanmathi, S., Sumithra, K., Surya, S., "Investigating a single slope solar still
with a nano-phase change material", Materials Today: Proceedings, Vol. No.45, Issue
No., pp.7922-7925, 2021 |
|
Chandrasekaran, M., Prakash, K.B., Prakash, S., Ravikumar, M., "Influence on
performance and emission characteristics of diesel engine by introducing medium
strength magnetic field in fuel and air lines", IOP Conference Series: Materials
Science and Engineering, Vol. No.764, Issue No.1, pp.-, 2020 |
|
Kumar, P.M., Saravanakumar, P.T., Mylsamy, K., Kishore, P., Prakash, K.B., "Study on
thermal conductivity of the candle making wax (CMW) using nano - TiO2 particles for
thermal energy storage applications", AIP Conference Proceedings, Vol. No.2128,
Issue No., pp.-, 2019 |
|
Kumar, P.M., Anandkumar, R., Sudarvizhi, D., Prakash, K.B., Mylsamy, K.,
"Experimental investigations on thermal management and performance improvement of
solar PV panel using a phase change material", AIP Conference Proceedings, Vol.
No.2128, Issue No., pp.-, 2019 |
|
Prakash, K., Islam, F.R., Mamun, K.A., Sharma, A., Sen, A., "Exergy Analysis of a
Heating Ventilation and Air Conditioning (HVAC) System", 2018 IEEE 7th International
Conference on Power and Energy, PECon 2018, Vol. No., Issue No., pp.378-383, 2018
|
|
Srinivasan, M., Karthick, K., Raviraj, N., Karthickram, S., Shrigowtham, M.,
Amarnath, N., "Analysis of power quality parameters in solid state ballast using cuk
converter topology", AIP Conference Proceedings, Vol. No.2492, Issue No., pp.-, 2023
|
|
Karthick, K., Sadasivan, N., Roshan, G., Selva Balaji, S., Vignesh, S.S., Sree
Athethan, S.K., "Improvements in Mechanical and Microstructural Properties of AA6061
Processed by Cyclic Channel Compression", Lecture Notes in Mechanical Engineering,
Vol. No., Issue No., pp.631-642, 2023 |
|
Karthick, K., Kumar, S.S., Karthik, T., Lokesh, K., Harris, T.M.A., Jegan, A.M.A.,
Raja, S., "Use of recycled plastic waste in concrete composites - A review", AIP
Conference Proceedings, Vol. No.2527, Issue No., pp.-, 2022 |
|
Nandhakumar, A., Mithulkiruthik, K.S., Kiritharan, C., Karthick, K., "Design and
development of a 2-liter flush system for squat latrine", IOP Conference Series:
Earth and Environmental Science, Vol. No.1125, Issue No.1, pp.-, 2022 |
|
Sathya, S., Karthick, K.N., Gudimindla, H., Kulkarni, A., Deivakani, M., Mohammed,
A., Siva Ramkumar, M., "Design and Implementation of Advanced Controller for
Aircraft Control", 5th International Conference on Inventive Computation
Technologies, ICICT 2022 - Proceedings, Vol. No., Issue No., pp.805-811, 2022 |
|
Karthick, K., Mohan Ramana, V., Muralikrishnan, M.S., Vishnuvardhan, N., Kumar,
S.N., "Effects of various reinforcement on mechanical properties of plastic block: A
review", Journal of Physics: Conference Series, Vol. No.2054, Issue No.1, pp.-, 2021
|
|
Harish Kumar, J., Prabhakaran, S., Alagar Pandi, K., Karthick, K.N., "Experimental
Investigation on Mechanical Properties of Banana Fiber Reinforced Vinyl Ester Resin
Composites", Springer Proceedings in Materials, Vol. No.5, Issue No., pp.1079-1093,
2021 |
|
Karthick, K., Malarvizhi, S., Balasubramanian, V., "Microstructural characterization
of dissimilar weld joint between ferritic steel and stainless steel", Materials
Science and Technology (United Kingdom), Vol. No.37, Issue No.15, pp.1257-1269, 2021
|
|
Karthick, K., Malarvizhi, S., Balasubramanian, V., "Mechanical properties and
microstructural characteristics of rotary friction welded dissimilar joints of
rolled homogeneous armor steel and medium carbon steel", Journal of the Mechanical
Behavior of Materials, Vol. No.30, Issue No.1, pp.171-178, 2021 |
|
Senthilgavaskar, S., Karthick, K., Bibin, C., "A review paper on solar operated
ridge and furrow formation machine", Materials Today: Proceedings, Vol. No.46, Issue
No., pp.3627-3630, 2021 |
|
Senthil Gavaskar, S., Karthick, K., Bibin, C., "Statistical analysis on hardness of
clutch facing at various stages in clutch face manufacturing", Materials Today:
Proceedings, Vol. No.46, Issue No., pp.3730-3734, 2021 |
|
Nandakumar, K., Surya, S.R., Karthick, K., Raviraj, N., Cheran, B., Poovizhi, V.,
Gokul, S., Nimisha, C., "Autonomous Vehicle for Drug Delivery", IOP Conference
Series: Materials Science and Engineering, Vol. No.995, Issue No.1, pp.-, 2020 |
|
Karthick, K., Bharathidhasan, D., Ashok Kumar, R., Mohamed Jaffarsha, F., Sreeraam,
M., Surya Prakash, K., "Investigation on Mechanical Properties of Aluminum Metal
Matrix Composites - A Review", IOP Conference Series: Materials Science and
Engineering, Vol. No.923, Issue No.1, pp.-, 2020 |
|
Ashok Kumar, R., Karthick, K., Jayasuriya, R., Aswin Kumar, J., Balaji Karthik, V.,
"Tribological Behaviour of Aluminum Metal Matrix Composites - A Review", IOP
Conference Series: Materials Science and Engineering, Vol. No.923, Issue No.1, pp.-,
2020 |
|
Prabanjan, S., Karthick, K., Rejvin Kumar, J., Ramkumar, S., Riswan Ahmed, A., "Wear
behavior and metallurgical characteristics of particle reinforced metal matrix
composites produced by hardfacing: A review", Materials Today: Proceedings, Vol.
No.33, Issue No., pp.599-606, 2020 |
|
Prabanjan, S., Naveen Ajay, S., Karthick, K., Malarvizhi, S., Balasubramanian, V.,
Krishnan, S.A., "Variation of mechanical properties across the dissimilar joints:
Ferritic steel and stainless steel", International Journal of Vehicle Structures and
Systems, Vol. No.12, Issue No.2, pp.192-196, 2020 |
|
Karthick, K., Malarvizhi, S., Balasubramanian, V., Gourav Rao, A., "Tensile
Properties Variation Across the Dissimilar Metal Weld Joint Between Modified 9Cr–1Mo
Ferritic Steel and 316LN Stainless Steel at RT and 550 °C", Metallography,
Microstructure, and Analysis, Vol. No.7, Issue No.2, pp.209-221, 2018 |
|
Karthick, K., Malarvizhi, S., Balasubramanian, V., Krishnan, S.A., Sasikala, G.,
Albert, S.K., "Tensile and impact toughness properties of various regions of
dissimilar joints of nuclear grade steels", Nuclear Engineering and Technology, Vol.
No.50, Issue No.1, pp.116-125, 2018 |
|
Karthick, K., Malarvizhi, S., Balasubramanian, V., "Evolution of microstructure at
the interface region between parent metal (modified 9Cr-1Mo steel) and buttering
layer (alloy 182) in dissimilar joints", Journal of Advanced Microscopy Research,
Vol. No.12, Issue No.3, pp.167-172, 2017 |
|
Bharath Reddy, G., Karu, R., Vinoth Kumar, J., Madasamy Alias Prabunivas, C.,
Agasthee Jain, R., Marichamy, S., Ramaswamy, S., "Optimization of stir casting
process parameter on copper aluminium composite", Materials Today: Proceedings, Vol.
No.66, Issue No., pp.1140-1143, 2022 |
|
Hanumanth Ramji, K.S., Vinoth Kumar, J., Amar Karthik, A., "Experimental
Investigation of Automobile radiator using Tungsten trioxide Nano-fluid", IOP
Conference Series: Materials Science and Engineering, Vol. No.995, Issue No.1, pp.-,
2020 |
|
Subramaniyan, M., Eswaran, P., Appusamy, A.M., Poovendrakumar, M., Pranesh, V.R.,
Sabarish, K., Sravanthi, G., "Drilling parameters optimization of AA2218 based metal
matrix composites by using Taguchi method", AIP Conference Proceedings, Vol.
No.2492, Issue No., pp.-, 2023 |
|
Aravinth, B., Manivannan, S., Rameshkannan, C., Subramaniyan, M., Raj Kumar, V.,
"Performance Analysis of Vortex Tube Refrigeration System by Experimental Method",
Lecture Notes in Mechanical Engineering, Vol. No., Issue No., pp.669-677, 2023 |
|
Subramaniyan, M., Karuppan, S., Pethu Pon Kumar, G., Peranandhan, T., Praveen, M.,
"Investigation on Flexural Property of Sandwich 3D Printed PLA Components-A Review",
Materials Science Forum, Vol. No.1075, Issue No., pp.103-114, 2022 |
|
Subramaniyan, M., Karuppan, S., Radhakrishnan, K., Rajesh Kumar, R., Saravana Kumar,
K., "Investigation of wear properties of 3D-printed PLA components using sandwich
structure – A review", Materials Today: Proceedings, Vol. No.66, Issue No.,
pp.1112-1119, 2022 |
|
Subramaniyan, M., Karuppan, S., P, P., Anand A, P., Vasanthan A, P., "Survey on
compression property of sandwich 3D printed PLA components", Materials Today:
Proceedings, Vol. No.66, Issue No., pp.955-961, 2022 |
|
Prakash, E., Subramaniyan, M., Appusamy, A.M., Mathan Kumar, P., Dinesh, M., Naveen,
M., Santhosh, C., "Review on Recent Additive Manufacturing Technologies", Springer
Proceedings in Materials, Vol. No.5, Issue No., pp.29-34, 2021 |
|
Prakash, E., Subramaniyan, M., Naveen Sankar, A.K., Chandra Kumar, K., "Additive
Manufacturing Parameter Optimization with Automated Post-printing Flaw Detection
Using Convolutional Neural Networks", Springer Proceedings in Materials, Vol. No.5,
Issue No., pp.127-135, 2021 |
|
Subramaniyan, M., Eswaran, P., Appusamy, A., Srimannarayana Raju, P., Rahini, V.,
Madhumitha, T.R., Thisha, R., "A survey on applications of additive manufacturing
techniques in tissue engineering", Materials Today: Proceedings, Vol. No.45, Issue
No., pp.8036-8040, 2021 |
|
Subramaniyan, M., Karuppan, S., Eswaran, P., Appusamy, A., Shankar, A.N., "State of
art on fusion deposition modeling machines process parameter optimization on
composite materials", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.820-827, 2021 |
|
Eswaran, P., Subramaniyan, M., Appusamy, A., Annakalyani, N.S., Pusapati, S.R.,
"Investigations on acute angle parts fabricated fusion deposition modelling parts
volumetric shrinkage and surface roughness", Materials Today: Proceedings, Vol.
No.45, Issue No., pp.930-935, 2021 |
|
Venkataramanan, A.R., Subramaniyan, M., Kumar, S.L., Jawahar, R.R., Prabhu, L.,
"Application of CCD in RSM to obtain optimize treatment of tribological
characteristics of WC-10Co-4Cr nanoceramic thermal spray coating", Materials Today:
Proceedings, Vol. No.45, Issue No., pp.6160-6170, 2020 |
|
Ramesh, A.P., Subramaniyan, M., Eswaran, P., "Review on friction welding of
similar/dissimilar metals", Journal of Physics: Conference Series, Vol. No.1362,
Issue No.1, pp.-, 2019 |
|
Appusamy, A., Eswaran, P., Subramaniyan, M., "The design and dynamic analysis of
active suspension systemfor all-terrain vehicle", International Journal of
Mechanical and Production Engineering Research and Development, Vol. No.9, Issue
No., pp.14-19, 2019 |
|
Subramaniyan, M., Karuppan, S., Eswaran, P., Anandhamoorthy, A., "Review on 4D
printing materials, stimuli and its future application", International Journal of
Mechanical and Production Engineering Research and Development, Vol. No.9, Issue
No., pp.316-327, 2019 |
|
Appusamy, A.M., Eswaran, P., Subramaniyan, M., "Investigation on dry sliding wear
behaviour of self-lubricating metal matrix composites reinforced with fly ash and
solid lubricant", International Journal of Recent Technology and Engineering, Vol.
No.7, Issue No.4, pp.413-416, 2019 |
|
Eswaran, P., Sivakumar, K., Subramaniyan, M., "Minimizing error on circularity of
FDM manufactured part", Materials Today: Proceedings, Vol. No.5, Issue No.2,
pp.6675-6683, 2018 |
|
Kalidasan, B., Hassan, M.A., Pandey, A.K., Chinnasamy, S., "Linear cavity solar
receivers: A review", Applied Thermal Engineering, Vol. No.221, Issue No., pp.-,
2023 |
|
Perumal, G., Senthilkumar, N., Subramaniyan, C., Ramasamy, R., Satheshkumar, D.,
"Tailoring the Mechanical and Tribological Properties of Ti-6Al-4 V Alloy through
Duplex Heat Treatment", Journal of Materials Engineering and Performance, Vol. No.,
Issue No., pp.-, 2023 |
|
Chinnasamy, S., Arunachalam, A., "Experimental investigation on direct expansion
solar-air source heat pump for water heating application", Renewable Energy, Vol.
No.202, Issue No., pp.222-233, 2023 |
|
Vadivel, Subramaniyan, C., Muthukumar, K., Bharani, T., "Ergonomics hazards and risk
assessment for the saw mill operations", Materials Today: Proceedings, Vol. No.66,
Issue No., pp.717-724, 2022 |
|
Subramanian, M., Hoang, A.T., B, K., Nižetić, S., Solomon, J.M., Balasubramanian,
D., C, S., G, T., Metghalchi, H., Nguyen, X.P., "A technical review on composite
phase change material based secondary assisted battery thermal management system for
electric vehicles", Journal of Cleaner Production, Vol. No.322, Issue No., pp.-,
2021 |
|
Chinnasamy, S., Jothirathinam, S., Balasubramanian, K., Anbuselvan, N., Yuvaraj, T.,
Prabaharan, N., Senjyu, T., "Investigation on the optical design and performance of
a single-axis-tracking solar parabolic trough collector with a secondary reflector",
Sustainability (Switzerland), Vol. No.13, Issue No.17, pp.-, 2021 |
|
Kalidasan, B., Divyabharathi, R., Pandey, A.K., Subramaniyan, C., Mohankumar, S.,
"Technological Advancement of Solar Thermal System Desalination Process-A Review",
IOP Conference Series: Materials Science and Engineering, Vol. No.1059, Issue No.1,
pp.-, 2021 |
|
Subramaniyan, C., Jegadeeshwari, M., Sridhar, A.M., Suresh, S., "Performance
Analysis of CO2 Heat Pump for Milk Pasteurization Application", Springer Proceedings
in Materials, Vol. No.5, Issue No., pp.11-20, 2021 |
|
Subramaniyan, C., Naveen Kumar, R., Siva Ranjith, S., Thiyagu, S., "Analyzing the
Performance of CO2 Heat Pump for Mushroom Drying Application", Springer Proceedings
in Materials, Vol. No.5, Issue No., pp.963-970, 2021 |
|
Subramani, J., Nagarajan, P.K., Subramaniyan, C., Anbuselvan, N., "Performance
studies on solar parabolic dish collector using conical cavity receiver for
community heating applications", Materials Today: Proceedings, Vol. No.45, Issue
No., pp.1862-1866, 2021 |
|
Balachandar, V., Ramkumar, T., Kalidasan, B., Subramaniyan, C., "Experimental study
on ash content & calorific value of coal used in thermal power station",
Materials Today: Proceedings, Vol. No.45, Issue No., pp.457-461, 2021 |
|
Babu, M., Bhuvanesh, N., Raj, S.S., Elavarasan, E., "Design and optimization of
linear Fresnel reflector concentrating solar system using particle swarm
optimization algorithms", Materials Today: Proceedings, Vol. No.66, Issue No.,
pp.1038-1043, 2022 |
|
Renuka, K., Bhuvanesh, N., Reena Catherine, J., "Kinematic and Dynamic Modelling and
PID Control of Three Degree-of-Freedom Robotic Arm", Springer Proceedings in
Materials, Vol. No.5, Issue No., pp.867-882, 2021 |
|
Reena Catherine, J., Bhuvanesh, N., Prasanna, M., Manojj, S., "System Identification
Using Adaptive Algorithms", Springer Proceedings in Materials, Vol. No.5, Issue No.,
pp.971-986, 2021 |
|
Suganya Priyadharshini, G., Satish Kumar, T., Anbuchezhian, N., Vaira Vignesh, R.,
Subramanian, R., Velmurugan, T., Kamal Basha, K., "Influence of tool traverse speed
on microstructure and mechanical properties of CuNi/B4C surface composites",
Transactions of the Institute of Metal Finishing, Vol. No.99, Issue No.1, pp.38-45,
2021 |
|
Kanna, P.R., Chandrasekaran, M., Ravikumar, M., "Experimental Investigation of
Solar-Based Air Heater Rectangular Duct Having Uniform Spaced Dimple Shaped as
Roughness Element on the Absorber Plate", Springer Proceedings in Materials, Vol.
No.5, Issue No., pp.903-912, 2021 |
|
Santhosh, N., Srinivasan, M., Chandrasekaran, M., Sarangapani, E., "Efficiency
assessment and improvement measures for thermal power plant in India", IOP
Conference Series: Materials Science and Engineering, Vol. No.995, Issue No.1, pp.-,
2020 |
