Dr Anandha Moorthy A - Bannari Amman Institute of Technology

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	13.06.2008
Industry	Coimbatore Compressor Engineering	01.07.1999	31.05.2002	2 Year(s) & 11 Month(s)

Degree	Specialization	Institute	University	Year of Passing
B.E	Mechanical	Erode Sengunthar Engineering College	Anna University, Chennai	2005
M.E	Engineering Design	Kongu Engineering College	Anna University, Chennai	2008
Ph.D	Mechanical	Bannari Amman Institute of Technology	Anna University, Chennai	2016

S.No.	Subject Area
1	Design
2	Composite Materials
3	Vibration Condition Monitoring

Anandha Moorthy A, Madheswaran S,Sivakumar K, “Effect of Different Fillers on Mechanical Properties of Fdm-Printed Layered Pla Parts”, Polimery, Vol. No.69/2, Issue No.2, 2024

Kannakumar K, Manikandan P, Ravivarman G, Sivalingam A, Anandha Moorthy A , Karthik A ,R Girimurugan,”Enhanced Behavior of Solar Stills with Modified Absorber Surfaces: Comparative Analysis of Floating Wick Designs”First International Conference on Green Energy, Environmental Engineering and Sustainable Technologies (ICGEST 2023)https://doi.org/10.1051/e3sconf/202345502002 2023

Anandhamoorthy A, Jegan M M, Prakash Kanna G, Senthilkumar C, Radha krishnan B,”Experimental Investigation of AL7075 Reinforced with WC and SIC Metal Matrix Composites”International Conference on Latest Developments in Materials & ManufacturingVolume 60, Part 3 , Pages 1358-1361https://doi.org/10.1016/j.matpr.2021.10.239.2022

Anandha Moorthy, A, Prakash, E, Madheswaran, S, Sasikumar, C, Vairavel, M, Girimurugan, R, “Experimental Investigations on Mechanical Properties and Morphological Analysis of Carbon Steel Grade III Leaf Spring Steel”, Springer Proceedings in Materials, Vol. No.5, Pages.629-635, 2021

Anandha Moorthy, A, Girimurugan, R, Prakash, E, Madheswaran, S, Naveen Sankar, A, Sriman, P, “Investigations on Flexural Performance of Epoxy Matrix Composites Strengthened with Chemically Modified and Unmodified Banana Fiber/Used Camellia Sinensis (UCS) Particles”, Materials Today: Proceedings, Vol. No.45, Pages.8115-8119, 2021

Selvakumar, A, Anandha Moorthy, A, Sundaresan, S, Prakash, C, “Preparation, Wear Resisting Property and Application of Mwcnts/Ni Composite Coating for Sewing Needles”, International Journal of Engineering and Advanced Technology, Vol. No.8, Issue No.2, Pages.143-147, 2018

Anandha Moorthy, A, Uvaraja, V.C, Natarajan, N, Palani, P.K, Dhanendran, N, Anantha Kumar, M, Satheesh, K.S, “Tribological Behavior of Aluminium Based MMC Subjected to Various Temperature”, International Journal of Applied Engineering Research, Vol. No.9, Issue No.22, Pages.14207-14215, 2014

Anandha Moorthy, A, Natarajan, N, Palani, P.K, Suresh, M, “Study on Tribological Characteristics of Self-Lubricating AA2218-Fly Ash-White Graphite Composites”, International Journal of Engineering and Technology, Vol. No.5, Issue No.5, Pages.4193-4198, 2013

Anandha Moorthy, A, Natarajan, N, Palani, P.K, Manojkumar, M, “Microstructure and Dry Sliding Wear Behavior of AA2218 Based Self-Lubricating Metal Matrix Composites”, International Review of Mechanical Engineering, Vol. No.7, Issue No.6, Pages.1142-1146, 2013

Anandha Moorthy A, “Experimental Investigation of Natural Fiber Reinforced Polymer Composite”, 2nd International Conference on “Innovative Trends in Engineering and Sciences (ICITES-2024)”, BIT, 2024.

Anandha Moorthy A, Madheswaran S, ‘Investigation on the Morphology, Thermal Properties of the Fish Scale and Eggshell Filled Acrylonitrile Butadiene Styrene (ABS) Composite”, 2nd International Conference on Innovative Trends in Engineering and Sciences (ICITES-2024)”, BIT, 2024.

Anandha Moorthy A, Girimurugan M, “Enhanced Behavior of Solar Stills with Modified Absorber Surfaces: Comparative Analysis of Floating Wick Designs”, International Conference on “Green Energy, Environmental Engineering And Sustainable Technologies (ICGEST 2023)”, KLS Gogte Institute of Technology, Belagavi, Karnataka, India, 2023.

Anandha Moorthy A, S U Narmatha, Ranjithkumar A Girimurugan R, “Ms316 – Investigation on Three Pass Curved Serpentine Flow Channel PEM Fuel Cell Performance for Dissimilar Cell Potential using COMSOL”, International Conference on “Innovative Trends in Engineering and Sciences – ICITES-2022”, BIT, 2022.

Anandha Moorthy A, “Solar Water Desalination using Paraffin Wax as Phase Change Material”, International Conference on “Recent Advances in Technology & Engineering (CRATE-2021)”, VEMU Institute of Technology, 2021.

Anandha Moorthy A, “Time Domain Analysis for Monitoring and Evaluating the Performance of Self-Lubricating Composite Material Based Journal Bearings”, 2nd International Conference on “Mechatronics in Energy and Environment Protection (ICMEEP 2021)”, BIT, 2021.

Anandha Moorthy A, “Solar Water Desalination Using Paraffin Wax As Phase Change Material”, International Conference on “Recent Advances in Technology & Engineering (CRATE-2021)”, VEMU Institute, Andhra State, 2021.

Anandha Moorthy A, “Design and Modification of Direct Ink Writing 3D Printer”, 2nd International Conference on “Recent Innovation In Science, Engineering and Technology”, Invertis University, Bareilly, U.P, 2021.

Anandha Moorthy Appusamy, Arunkumar R, Vinoth Kumar KS and Vijaya Prasanth C, “Characterization and Fabrication of Nylon and PLA based Polymer Matrix Composites using 3D Printing”, International Conference on Research Advancements , Velammal Institute of Technology, Chennai, March 2020.

Anandha Moorthy Appusamy, Prakash Eswaran, Madheswaran Subramaniyan, Arunkumar Rajamanickam, Vinoth Kumar Selvakumar and Vijaya Prasanth , “Invasive Parthenium Weed as Reinforcement in Polymer Matrix Composite to Reduce the Environmental Impact”, ICAMR2019, BIT, Sathyamangalam, December 2019.

Anandha Moorthy Appusamy, Prakash Eswaran, Madheswaran Subramaniyan, Arunkumar Rajamanickam, Vinoth Kumar Selvakumar and Vijaya Prasanth , “Characterization and Fabrication of Nylon and PLA Based Polymer Matrix Composites Using 3D Printing “, ICAMR2019, Department of Mechanical Engineering, BIT, Sathyamangalam, December 2019.

Prakash Eswaran, Naveen Shankar Annakalyani, Anandha Moorthy Appusamy, Madheswaran Subramaniyan , “Accelerated Process Monitoring in Additive Manufacturing using Voxel-based Visual PatternMining with Convolutional Neural networks “, International Conference on Advances in Materials Research (ICAMR 2019) , Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam , December 2019.

Madheswaran Subramaniyan, Sivakumar Karuppan, Prakash Eswaran, Anandha Moorthy Appusamy and Naveen Shankar Annakalyani, “State of art on Fusion Deposition Modeling Machines Process Parameter Optimization on Composite Materials”, International Conference on Advances in Materials Research (ICAMR 2019) , Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam , December 2019.

Anandha moorthy Appusamy a , Prakash Eswaran a , Madheswaran Subramaniyan a , Sasikumar C , Girimurugan R b and Vairavel M b a, “Experimental Investigations on Mechanical Properties of Egg Shell Particles Reinforced Epoxy Resin Composites “, International Conference on Advances in Materials Research (ICAMR 2019) , Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, December 2019.

Madheswaran Subramaniyan, Prakash Eswaran, Anandha moorthy Appusamy, Madhan kumar P,Pusapati Srimannarayana Raju, Sivakumar Karuppan , “Mechanical properties review on Natural fibre reinforced polymers on 3D printing “, International Conference on Advances in Materials Research (ICAMR 2019) , Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam , December 2019.

Madheswaran Subramaniyan, Prakash Eswaran, Anandha moorthy Appusamy, Pusapati Srimannarayana Raju, Naveen Sankar Anna kalyani , “Drilling Parameter Optimization of Composite Material “, International Conference on Advances in Materials Research (ICAMR 2019) , Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam , December 2019.

A Anandha Moorthy, “Experimental Studies on Mechanical Behaviour of Poly Lactide (PLA) – Al 2 O Composites”, ICAMR 2019 , Dept of Mech Engg, BIT, December 2019.

Appusamy Anandha Moorthy, “Experimental Studies on Mechanical Behaviour of Poly Lactide (PLA) – Al2O3 Composites”, ICAMR 2019, Dept of Mech Engg, BIT, December 2019.

Anandha Moorthy Appusamy, “EFFECT OF HEAT TREATMENT ON TRIBOLOGICAL PROPERTIES OF TALC AND BORON NITRATE BASED COMPOSITE MATERIALS”, ICAMPC-2019, Dept of Mechatronics Engineering, BIT, September 2019.

Anandha Moorthy Appusamy, “CHARACTERIZATION AND PERFORMANCE ANALYSIS OF GRAPHITE AND MOLYBDENUM DISULFIDE”, ICAMPC 2019, Dept of Mechatronics Engg, BIT, September 2019.

Prakash E, Balamurugan T, Anandha Moorthy A , “THE TETRAPHIBIAN – AN URBAN FUTURE TRANSPORTATION SYSTEM”, INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS PROCESSIN AND CHARACTERIZATION (ICAMPC-2019) , Departments of Aeronautical, Automobile, Mechanical and Mechatronics Engineering, BIT, September 2019.

A Anandha Moorthy, “Oil Skimmer”, 3rd National Conference on Technologies for Green Mobility 2019, Department of Automobile Engineering, Bannari Amman Institute of Technology, Sathyamangalam, March 2019.

Appusamy Anandha Moorthy, “Oil Skimmer”, 3rd National Conference on Technologies for Green Mobility – 2019, Department of Automobile Engineering, Bannari Amman Institute of Technology, March 2019.

A Anandha Moorthy, DHILIP KUMAR N (151ME137) ESWARAN D (151ME148) JEEVANANTHAM G(151ME180) , “Design and Fabrication of Multi Spindle Drilling Machine”, 2nd National conference on Cutting Edge Innovations in Engineering and Technology, Cheran College of Engineering, Karur, March 2019.

A Anandha Moorthy, DHILIP KUMAR N (151ME137) ESWARAN D (151ME148) JEEVANANTHAM G(151ME180) , “Design and Fabrication of Multi Spindle Drilling Machine”, 2nd National conference on Cutting Edge Innovations in Engineering and Technology, Cheran College of Engineering, Karur, March 2019.

Dr A Anandha Moorthy, “Experimental Studies on Parthenium Short Fiber Reinforced Thermoplastic Composite Materials Prepared by Additive Manufacturing Process”, Recent Trends in Nanomaterials for Energy, Environmental and Engineering Applications (ICONEEEA – 2K19), K-Ramakrishnan College of Technology, Trichy, March 2019.

Anandha Moorthy A, “Development and Characterisation of Polymer Matrix Composite Materials”, IMTEX 2019, IMTEX, Bangalore, January 2019.

A Anandha Moorthy, “Design and Fabrication of Suspension system for All Terrain Vehicle”, National Conference on Advancements in Mechanical, Manufacturing , M.Kumarasamy College of Engineering, Karur, March 2018.

A Anandha Moorthy, “Fabrication of Fertilizer Spraying Machine”, National Conference on Advancements in Mechanical, Manufacturing , M. Kumarasamy College of Engineering, Karur, India, March 2018.

A Anandha Moorthy, “Failure Analysis of Gear Box”, National Conference on Advancements in Mechanical, Manufacturing , M. Kumarasamy College of Engineering, Karur, India, March 2018.

Dr A Anandha Moorthy, “Mechanical Behaviour of MMC”, NCAMMCE 18, MK College of Engg, MKCE Karur, March 2018.

Dr A Anandha Moorthy, “Characterization of PMC”, NCAMMCE 18, MKCE, Karur, March 2018.

Dr A Anandha Moorthy, “Condition Monitorinf of Journal Bearings Subjected to Radial Load”, NCETME 18, SNS College of Technology, Coimbatore, March 2018.

Madheswaran S, “Investigation of surface roughness and volumetric shrinkage of acute angle fabricated with fusion deposition modeling”, International conference on advance in industrial engineering application ICAIEA2018, Anna University, Chennai, January 2018.

A. Anandha Moorthy, “Prediction System for Investigating Process Parameters on Dry Sliding Wear of Self-Lubricating Metal Matrix Composites”, Third International Conference on Advances in Industrial Engineering Applications – (ICAIEA 18), Anna University, Chennai, January 2018.

A. Anandha Moorthy, Naveen Sankarannakalyani , “Investigations on Surface Roughness and Volumetric Shrinkage of Acute Angle Parts Fabricated with Fusion Deposition Method”, Third International Conference on Advances in Industrial Engineering Applications – (ICAIEA 18) , Anna University, Chennai, Tamilnadu, India, January 2018.

A. Anandha Moorthy, C. Sasikumar, KT. Sevugan chetty, P. Sasikumar , “Condition Monitoring of Plain Bearings prepared with Self-Lubricating Composite Materials”, International Conference on Advanced Material Science and Technology (ICAMST), Bannari Amman Institute of Technology, Sathyamangalam, Erode District, August 2017.

G. Ramesh , “Effect of Heat Treatment on Mechanical Properties Aluminium 7075 Hybrid Metal Matrix Composites”, International Conference on Advanced Material Science and Technology (ICAMST), Bannari Amman Institute of Technology, Sathyamangalam, Erode District, August 2017.

A Anandha Moorthy, “Pedal operated vehicle for handless people”, National Conference on OPTEST 2017, Bannari Amman Institute of Technology, Sathyamangalam, Erode District, April 2017.

A. Anandha Moorthy, “Improving the Performance of Centrifugal Pump by Applying Self Lubricating Composite Material as a Material for Plain Bearing”, International Conference on Futuristic Innovations in Mechanical Engineering and Manufacturing Management (ICFIMEMM 17), M. Kumarasamy College of Engineering, Karur, March 2017.

A Anandha Moorthy, T Ramesh Kumar and C Sasikumar, “Improving the Performance of Centrifugal Pump by applying Self-Lubricating Composite Material as a Material for Plain Bearing”, International Conference on Futuristic Innovations in Mechanical Engineering and Manufacturing Management (ICFIMEMM-17), M Kumarasamy College of Engineering, Karur, March 2017.

A. Anandha Moorthy, “Vibration Based Condition Monitoring of Plain Bearings Subjected to Radial Load”, Indo-Brazil Bilateral Second International Conference on Advanced Materials , Kalasalingam University – KLU, Krishnan Koil, Tamilnadu, India, March 2017.

A. Anandha Moorthy, “Tribological and Mechanical Characteristics of Developed Heat Treated Al-SN-SI Alloy under Lubricated Conditions”, Indo-Brazil Bilateral Second International Conference on Advanced Materials , Kalasalingam University – KLU, Krishnan Koil, Tamilnadu, India, March 2017.

A Anandha Moorthy, T Ramesh Kumar, G Senthilkumar, and S Madheswaran, “Vibration Based Condition Monitoring of Plain Bearings Subjected to Radial Load”, Bilateral Second International Conference of Advanced Materials , Department of Mechanical Engineering, Kalasalingam University-KLU, India and Departmento de Engenharia Automotiva, Faculdade Gama Universidade de Brasilia-UnB, Brasilia, Madurai, March 2017.

T Ramesh Kumar, K L Senthil Kumar, A Anandha Moorthy and A D Latha, “Tribological and Mechanical Characteristics of Developed Heat Treated Al-Sn-Si Alloy under Lubricated Conditions”, Bilateral Second International Conference of Advanced Materials , Department of Mechanical Engineering, Kalasalingam University-KLU, India and Departmento de Engenharia Automotiva, Faculdade Gama Universidade de Brasilia-UnB, Brasilia, Madurai, March 2017.

A. Anandha Moorthy , “A Study on Mechanical Behaviours of Newly Developed Aluminium Based Alloy”, First International Conference on Recent Innovations In Engineering, Technology and Management – (ICRIETM 2017) , Nandha Engineering College, Erode, Tamilnadu, India, March 2017.

T Ramesh Kumar, K L Senthil Kumar, A Anandha Moorthy and A D Latha, “A Study on Mechanical Behaviours of Newly Developed Aluminium-Based Alloys”, First International Conference of Recent Innovations in Engg., Technology and Management (ICRIETM 2017), Nandha Engineering College, Perundurai, March 2017.

A Anandha Moorthy, “Catalytic Converter for IC Engines”, National Conference on OPTEST 2017, Bannari Amman Institute of Technology, Sathyamangalam, Erode District, March 2017.

A Anandha Moorthy, “3D Printing Technology for Medical Applications”, National Conference on OPTEST 2017, Bannari Amman Institute of Technology, Sathyamangalam, Erode District, March 2017.

A Anandha Moorthy, “Vibration Condition monitoring of Plain Bearings Subjected to Radial Load”, Eleventh National conference on Optimization Techniques in Engineering Sciences , Bannari Amman Institute of Technology, Sathyamangalam, Erode District, April 2016.

A. Anandha Moorthy, S Gangadharan, “Enchancing the Tribological Properties of Composite Materials for Centrifugal Pump Applications”, International conference on Mechanical and Building Sciences (ICMBS-2016) , Department of Mechanical Engineering, SNS College of Technology, Coimbatore , March 2016.

A. Anandha Moorthy, M.Chellappan Vigneshwar, T. Jeeva, “Vibration Characteristics of Plain Bearings Subjected to Radial Load”, International Conference on Sustainable Materials, Design and Applications 2016 – (ICSMDA 16), Kongu Engineering College, Erode, Tamilnadu, India, March 2016.

A Anandha Moorthy, “Review on Tribological Charaterization of AA2218 Based Metal Matrix Composites”, Eleventh National conference on Optimization Techniques in Engineering Sciences , Bannari Amman Institute of Technology, Sathyamangalam, March 2016.

A Anandha Moorthy, S Gangadharan, “Enhancing the Tribological Properties of Composite Materials for Centrifugal Pump Applications”, Ninth National conference on Advances in Mechanical Sciences (AIMS 2016), Department of mechanical Engineering, Kumaraguru College of Technology, Coimbatore , March 2016.

Anandha Moorthy A, Kumaresan R, Senthilkumar S, Nirmalkumar M and Bharathi S , “Performance Analysis of Self-Lubricating Composite based Plain Bearing under different loads”, International Conference on Developments in Engineering Research, ICDER, Salem, April 2015.

Anandha Moorthy A, Kumaresan R, Senthilkumar S, Natarajan N and Palani P K, “Dynamic Analysis of Journal Bearing under different loads”, Tenth National conference on Optimization Techniques in Engineering Sciences , Bannari Amman Institute of Technology, Sathyamangalam, Erode District, April 2015.

Anandha Moorthy A, Natarajan N, Palani P K, Anantha Kumar M, Satheesh K S, “Review on Tribological Characterization of Hybrid Metal Matrix Composite”, Arulmurugan College of Engineering, Karur, March 2015

Anandha Moorthy A, Natarajan N, Palani P K, Kumarbabu P, Anantha Kumar M, Satheesh K S, “Dry sliding wear Behaviour of Aluminium Alloy based Self Lubricating Hybrid Metal Matrix Composite Using Taguchi Techniques”, International Conference on Advances in Design and Manufacturing (ICAD), NIT, Trichy, March 2014.

A Anandha Moorthy, M Manojkumar, M Suresh, M Sivakumar, “Microstructure and Tribological Behaviour of Alluminium Alloy Based Self Lubricating Hybrid Metal Matrix Composite for High Temperature Applications”, Eighth National conference on Optimization Techniques in Engineering Sciences, Bannari Amman Institute of Technology, Sathyamangalam, Erode District, April 2013.

A Anandha Moorthy, M Nandhagopal, M Suresh M Manojkumar, M Sivakumar, “Tribological Performance of an Alluminium 2218 Based Hybrid Metal Matrix Composites Produced by Stir Casting”, Eighth National conference on Optimization Techniques in Engineering Sciences , Bannari Amman Institute of Technology, Sathyamangalam, April 2013.

A Anandha Moorthy, M Sivakumar, M Manojkumar, M Suresh, “Effect of Addition of Fly ash Particulates on the Wear Behaviour in Alluminium Fly ash Graphite Composites”, Eighth National conference on Optimization Techniques in Engineering Sciences , Bannari Amman Institute of Technology, Sathyamangalam, Erode District, April 2013.

A. Anandha Moorthy , “Application of Taguchi Techniques to Study Dry Sliding Wear Behaviour of hybrid Metal Matrix Composites”, Innovations in Engineering and Technology for Sustainable Development (IETSD 2012) , Department of mechanical Engineering, BIT, Sathyamangalam, December 2012.

A. Anandha Moorthy , “Dry sliding wear and Mechanical Behavior of Aluminium/Flyash /Graphite Hybrid Metal Matrix Composite Using Taguchi Method”, Seventh National Conference on Optimization Techniques in Engineering Sciences , Bannari Amman Institute of Technology, Sathyamangalam, Erode, April 2012.

A. Anandha Moorthy , “Wind flow analysis of luxury vehicle radiator by using CFD”, Sixth National conference on Optimization Techniques in Engineering Sciences , Bannari Amman Institute of Technology, Sathyamangalam, April 2011.

A Anandha Moorthy, E Prakash, “Effect of Rubbing in a Shaft, Bearing Housing Vibration Signatures and Detection of Possible Failures”, National Conference on Optimization Techniques in Engineering Sciences and Technology (OPTEST – 2009) , Bannari Amman Institute of Technology, Sathyamangalam, March 2009.

A Anandha Moorthy , “Natural Heat Distribution Characteristics of Food Stuff Display Cabinet-Experimental Investigation”, National Conference on Resend Advancement in Mechanical Engineering (Mech RAME-2008), Mahindhra Engineering College, Thiruchengodu, March 2008.

A Anandha Moorthy , “Effect of Booster Heating Coil in Food Stuff Display Cabinet-Experimental Investigation”, National Conference on Optimization Techniques in Engineering Sciences and Technology (OPTEST – 2008), Bannari Amman Institute of Technology, Sathyamangalam, March 2008.

A Anandha Moorthy, “Paper Act as a Tool (Wood Cutter)”, FUTURA 2007 Bannari Amman Institute of Technology, Sathyamangalam, Bannari Amman Institute of Technology, Sathyamangalam, March 2007.

S.No.	Title	Investigator(s)	Funding Agency	Amount	Project Status	Sanction Date
1	Characterization of the self lubricating metal matrix composites	A Anandha Moorthy	Tamil Nadu State Council for Science and Technology (TNSCST)	30000	Completed	12.04.2017
2	Solar and Food operated tricycle with foot controlled steering mechanism for disabled peoples	A Anandha Moorthy	Tamil Nadu State Council for Science and Technology (TNSCST)	10000	Completed	12.04.2017
3	Simplified vegetable peeler for commercial and domestic use	A Anandha Moorthy	Tamil Nadu State Council for Science and Technology (TNSCST)	10000	Completed	27.01.2018
4	Design, Development and Validation of Thermocycler and Real Time Cycler (DNA amplification Instrument) mostly used in disease diagnosis	DR SP Selvaraj	The Department of Science	35.02 Lakhs	ongoing	14.03.2017
5	Technological Interventions for Enhancing Productivity, Scalability and Value Addition to Obtain Fiber from a Local Plant (Urtica Dioica) for Tribals in Nagaland: A Waste to Wealth Programme	Dr. S. P. Selvaraj, Dr. Zavei Hiese (NASTEC, Nagaland) Dr. Sivaraman P.	DST-SEED	68,82,120.00	Accepted with comments	06.02.2020
6	Effective Utilization of Invasive Harmful Parthenium Weed Plant as Reinforcement for Polymer Matrix Composite Material Processed by 3D Printing Technology to Reduce Bio Diversity and save the Environment	Dr A Anandha Moorthy	TAMILNADU STATE COUNCIL FOR SCIENCE AND TECHNOLOGY	Rs 1,40,000/- (One Lakes Forty Thousand Only)	Submitted
7	Proposal submitted under Symposia Grant Scheme for Organizing an International conference on Advances in materials and research (ICAMR-2019)	Dr M Ravikumar	Council of Scientific	2,40,000
8	Proposal submitted under Symposia Grant Scheme for Organizing an International conference on Advances in materials and research (ICAMR-2019)	Dr M Ravikumar	CSIR-Symposium Grant	50000		17.10.2019
9	ISTE - Seminar Grant for International Conference on ICAMR 2019	A Anandha Moorthy	ISTE	100000
10	Technological interventions for enhancing productivity, scalability and value addition to obtain fiber from a local plant (Urtica dioica) for tribals in Nagaland- A waste to wealth programme	SP Selvaraj	DST SEED	6882120		01.01.2020
11	ICAMR 2019 International Conference	Anandha Moorthy A	ISTE - Tamilnadu Chapter	10000		22.01.2020
12	INVESTIGATIONS ON EFFECTIVE UTILIZATION OF VEGETABLE OIL AS LUBRICANT WITH NATURAL AND NANO METAL ADDITIVES	A Anandha Moorthy	TNSCST - DST	1400000
13	DEVELOPMENT OF LOW COST INCINERATOR TO DISPOSE THE MENSTRUAL WASTE ENVIRONMENT FRIENDLY	A Anandha Moorthy	TNSCST	10000
14	DEVELOPMENT OF LOW COST INCINERATOR TO DISPOSE THE MENSTRUAL WASTE ENVIRONMENT FRIENDLY	A Anandha Moorthy	TNSCST	10000

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	DESIGN AND FABRICATION OF BROOM STICK MAKING MACHINE	2022-03-25	202241016833	Filed	National	Self
2	DESIGN AND FABRICATION OF CONTACTLESS THERMOMETER	2021-12-23	202141060470	Filed	National	Self
3	DESIGN AND FABRICATION OF CASSAVA HARVESTER	2021-12-23	202141060158	Filed	National	Self
4	OBSTACLE DETECTION USING SENSOR FUSION AND DEEP NEURAL NETWORK FOR MOTION CONTROL OF SMART ELECTRIC	2021-12-23	202141060155	Filed	National	Self
5	AN INTELLIGENT PORTABLE MOSQUITO REPELLENT DEVICE	05.02.2019	201941004502	Filed	National Level	Self
6	Mechanism for Borewell pipe assembling and dismantling	31.05.2019	201941024373	Filed	National	Self
7	DESIGN OF BULB CHANGING MECHANISM FOR DOMESTIC APPLICATION	18.12.2019	E-2/4037/2019-CHE/201941052570	Filed	National	Self
8	Surface characterization tester for polymer composite materials functioning in above room temperature environment	25.01.2020		Filed	National	Self
9	SURFACE CHARACTERIZATION TESTER FOR POLYMER COMPOSITE MATERIALS FUNCTIONING IN ABOVE ROOM TEMPERATURE	02.03.2020	E-2/718/2020-CHE/202041008863	Filed	National	Self

S.No.	Topic	Program	Venue	Date
1	Workshop on "IOT Based Automated Irrigation System Based On Soil Moisture and Weather Report Using Arduino	Workshop	Excel Engineering College	09.08.2024
2	Design of machine Elements	Guest Lecture	Nandha Engineering College, Erode	18.11.2021
3	3D Printing	Techno Quest 2020 National level Symposium	Erode Sengunthar Engineering College	06.02.2020
4	Failure Theories	Two Days Seminar	Nandha College of Technology, Erode	23.09.2019
5	3D Printing Technology	Application of 3D printing in Medical and Aerospace Industries	Smart Class Room, Dept of Mech, BIT	30.08.2019
6	Bearings	Guest Lecture	Nandha College of Technology	28.10.2018
7	Design of Thread Fasteners	Guest Lecture	Nandha College of Technology	10.09.2018
8	Design of Machine Elements	Guest Lecture	Nandha College of Technology, Perundurai	20.10.2017
9	Ferrous Alloy	IE(I) Sponsored One day Seminar Programme	Vidyaa Vikas College of Engineering and Technology, Thiruchengodu	22.07.2017
10	Design of Transmission Systems	Guest Lecture	Nandha Engineering College, Perundurai	04.04.2017
11	Free and forced vibrations	Guest Lecture	SNS College of Engineering, Coimbatore	11.05.2016
12	Studies on Tribological Properties of Metal Matrix Composites	Guest Lecture	Sri Krishna College of Technology, Coimbatore	03.06.2015
13	Studies on Tribological Properties of Metal Matrix Composites	Guest Lecture	Sri Krishna College of Technology, Coimbatore	07.05.2015
14	Design of Machine Elements	Guest Lecture	CK College of Engineering and Technology, Cuddalore	03.11.2014
15	Design of Transmission Systems	Guest Lecture	CK College of Engineering and Technology, Cuddalore	14.02.2012
16	Design of Machine Elements	Guest Lecture	CK College of Engineering and Technology, Cuddalore	24.11.2011

S.No.	Title	Author	Publication	Year / Month
1	Metrology lab Manual for Academic Year 2018 - 2019	Y Arivu	BIT	2019

S.No.	Awards
1	Young Educator and Researcher Award
2	Certificate of Appreciation for Faculty Advisor
3	Young Scientist Fellowship
4	Best Student Project Award
5	Best Student Project of the Year 2019 by Institute of Scholars (InSc)
6	ISTE Tamilnadu Section Best Faculty Advisor for Engineering College 2019