Prof. Bhuvanesh N - Bannari Amman Institute of Technology

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	01.06.2016

Degree	Specialization	Institute	University	Year of Passing
B.E.	Mechanical Engineering	Jansons Institute of Technology Coimbatore	Anna University, Chennai	2014
M.E.	Thermal Engineering	Government College of Technology Coimbatore	Anna University, Chennai	2016

S.No.	Subject Area
1	Heat Pipe
2	Alternate Fuels

M. Babu , N. Bhuvanesh, Sachin S. Raj and E. Elavarasan, “Design and Optimization of Linear Fresnel Reflector Concentrating Solar System Using Particle Swarm Optimization Algorithms”, Volume 66, Part 3, 2022, Pages 1038-1043, https://doi.org/10.1016/j.matpr.2022.04.836.

N. Bhuvanesh, G. Kumaresan, K. Renuka, R. Mukeshu, Mohammed Hakeem and V.N.N. Harish, “Investigation on Development and Performance Analysis of Water Trash Collector”, Volume 66, Part 3, 2022, Pages 1216-1220, https://doi.org/10.1016/j.matpr.2022.05.014.

Subramaniyan, C, Prakash, K.B, Kalidasan, B, Bhuvanesh, N, Amarkarthik, A, “Exergy Analysis on Performance of Groundnut Solar Dryer with Forced Convection”, IOP Conference Series: Materials Science and Engineering, Vol. No.1059, Issue No.1, 2021

Renuka, K, Bhuvanesh, N, Reena Catherine, J, “Kinematic and Dynamic Modelling and PID Control of Three Degree-of-Freedom Robotic Arm”, Springer Proceedings in Materials, Vol. No.5, Pages.867-882, 2021

Reena Catherine, J, Bhuvanesh, N, Prasanna, M, Manojj, S, “System Identification Using Adaptive Algorithms”, Springer Proceedings in Materials, Vol. No.5, Pages.971-986, 2021

Bhuvanesh, N, Kumaresan, G, Subramaniyan, C, Sasikumar, C, Mukeshu, R, “Harvesting of Electricity from Handloom Weaving Machine Coupled with Dynamo”, Springer Proceedings in Materials, Vol. No.5, Pages.459-466, 2021

Subramaniyan, C, Kalidasan, B, Bhuvanesh, N, Prakash, K.B, Amarkarthik, A, “Second Law Analysis on Performance of Double Stage Reciprocating Air Compressor with Inter Cooler”, Materials Today: Proceedings, Vol. No.45, Pages.652-657, 2021

Bhuvanesh, N, Kumaresan, G, Rajasekaran, S, Adish, N.K, Saravanan, K, Subramaniyan, C, “Experimental Modelling and Analysis of Semi-Automated Waste Black Plastic Materials Sorter”, Materials Today: Proceedings, Vol. No.45, Pages.2029-2033, 2021

Subramaniyan, C, Prakash, S.I.V, Bhuvanesh, N, Kalidasan, B, Amarkarthik, A, “Study Based on the Reduction of Lot Time by Implementing Set Production and FMS in the Traditional Batch Production System”, Materials Today: Proceedings, Vol. No.45, Pages.502-506, 2021

Bhuvanesh, N, Kumaresan, G, Subramaniyan, C, “Performance and Emission Characteristics Analysis of Di-Diesel Engine Fuelled with Calophyllum Inophyllum Methyl Ester Diesel Blend”, International Journal of Mechanical and Production Engineering Research and Development, Vol. No.9, Pages.171-176, 2019

Bhuvanesh N, Bhuvanesh N, Santosh V Bhaskar, sachin S Raj, Dhiraj P Bhaskar, “Drilling Process of AISI D2 Steel With A Tialsin-Coated Carbide Drill – An Experimental Investigation And A Statistical Approach”, International Conference on “Advanced Materials and Technologies for Industry 4.O”, BIT, 2023.

Bhuvanesh N, Kalkidan Gossayea, Chenrayana, Gokul Selvaraj, Gokul S, “Investigation of TRIBO-Characteristics of Bio-Waste Particulate Polymer Composite: Experimental And Mathematical Approach”, International Conference on “Advanced Materials and Technologies for Industry 4.O”, BIT, 2023.

Bhuvanesh N, “Modelling and Development of the Heat Pipe for Laptop Cooling”, International Conference on “Advances in Materials Research”, BIT,2021.

Bhuvanesh N, “Design and Fabrication of Heat Pipes for Pc Custom Builds”, International Conference on “Advances in Materials Research”, BIT, 2021.

Bhuvanesh N, Subramaniyan C, “Analysing the Performance of Black Plastic and Waste Materials Sorter”, International Conference on “Waste, Energy and Environment”, Sathyabama Institute of Science and Technology, 2021.

REENA CATHERINE J, BHUVANESH N, PRASANNA M, MANOJJ S, “SYSTEM IDENTIFICATION USING ADAPTIVE ALGORITHMS”, INTERNATIONAL CONFERENCE ON ADVANCED MATERIAL RESEARCH, BIT, SATHYAMANGALAM, December 2019.

RENUKA K, BHUVANESH N, REENA CATHERINE J, “KINEMATIC AND DYNAMIC MODELLING AND PID CONTROL OF THREE DEGREE OF FREEDOM ROBOTIC ARM”, INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS RESEARCH, BIT, SATHYAMANGALAM, December 2019.

Bhuvanesh N, Kumaresan G, Subramaniyan C, “Harvesting of Electricity from Handloom Weaving Machine Coupled with Dynamo”, ICAMR 2019, December 2019.

Subramaniyan C, Bhuvanesh N, “Performance Analysis on CO2 heat pump for milk pasteurization Application”, ICAMR 2019, BIT, December 2019.

N Bhuvanesh, Ashok K S, Ganesh Kumar R, Gowtham Ganesh S, “Design and Development of Automation System for Home Appliances using Vocal Control”, International Conference on Mechanical and Building Sciences – ICMBS 2019, SNS College of Technology, Coimbatore, March 2019.

N Bhuvanesh, “Strategies to Improve Thermal Performance of Heat Pipe – A Review”, National Conference on Energy, Ecology and Environment, Bannari Amman Institute of Technology, Sathyamangalam, August 2018.

N Bhuvanesh, “Investigation on the Effects of Antioxidant Additive in A DI-Diesel Engine Fuelled with Calophyllum Inophyllum Methyl Ester Diesel Blend”, National Conference on Technologies for Green Mobility, Bannari Amman Institute of Technology, Sathyamangalam, March 2018.

N Bhuvanesh, “Experimental Modelling and Development of CVT with Teduced Slippage”, International Conference on Contemporary Design and Industrial Engineering Systems, National Institute of Technology, Trichy, January 2018.

N Bhuvanesh, “Analyzing the Performance of Solar PTC with Secondary Reflector”, International Conference on Advances in Energy Research, Indian Institute of Technology, Bombay, December 2017.

Subramaniyan C, Kalidasan B, Bhuvanesh N, “Analyzing the performance of Solar PTC with secondary Reflector”, 6th International conference on Advance in Energy Research, Department of Energy Engineering, IIT Bombay, December 2017.

Subramaniyan C Kalidasan B, Bhuvanesh Boopalan N, Sriram, “Analyzing the Impact of Tracking Deviation of Incident Radiation on Optical Performance Of Solar Parabolic Trough Collector”, International conference on Recent Advances in Mechanical Engineering Kingston Engineering College, Vellore, September 2017.

N Bhuvanesh, “Investigation of Influence of Grit Size of B4C Particles over the Mechanical Properties of B4C DRMM 6061 Aluminium Composite”, International Conference on Recent Innovations in Production Engineering, Madras Institute of Technology, Anna University, Chennai, March 2017.

N Bhuvanesh, “Design and Fabrication of Semi Automatic Coconut Dehusker”, National Conference on Optimization Techniques in Engineering Sciences and Technology, Bannari Amman Institute of Technology, Sathyamangalam, March 2017.

N Bhuvanesh, “Investigation of Influence of Grit Size of SiC Particles over the Mechanical Properties of SiC DRMM 6061 Aluminium Composite”, International Colloquium on Materials, Manufacturing and Metrology, Indian Institute of Technology, Chennai, August 2014.

N Bhuvanesh, “Design of gear systems for Moving Wind Turbines”, International Conference on Wind Energy: Materials, Engineering and Policies, BITS Pilani, Hyderabad campus, November 2012.

N Bhuvanesh, “LM6 Aluminium Alloy Subjected to Vibration during Solidification to improve mechanical property”, National Conference on Manufacturing Innovation Strategies and Appealing Advancements, PSG College of Technology, Coimbatore, April 2012.

S.No.	Title	Investigator(s)	Funding Agency	Amount	Project Status	Sanction Date
1	Harvesting of Electricity from Handloom Weaving Machine coupled with power generator Dynamo	Mr. N. Bhuvanesh,	TAMILNADU STATE COUNCIL FOR SCIENCE AND TECHNOLOGY, DOTE CAMPUS, CHENNAI-600025	7500	Granted	18.02.2019
2	Proposal submitted under Symposia Grant Scheme for Organizing an International conference on Advances in materials and research (ICAMR-2019)	Dr M Ravikumar	CSIR-Symposium Grant	50000		17.10.2019

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	DESIGN AND FABRICATION OF SMART BLIND STICK FOR VISUALLY IMPAIRED PERSONS	2023-02-20	202341011360	Filed	National	Self
2	METAL MONOLITH BASED SMOKELESS INCINERATOR FOR DOMESTIC APPLICATIONS	2021-09-20	202141042472	Filed	National	Self
3	DEVELOPMENT OF IOT CONTROLLED HANDLOOM MACHINE	2021-12-28	202141061119	Filed	National	Self
4	IRREGULAR SHAPE MEASURING TOOL	2021-10-27	202141049011	Filed	National	Self
5	BLACK WASTE PLASTIC SORTER	2021-09-20	202141042475	Filed	National	Self
6	FIRE REPULSION UNIT IN VEHICLE CHASSIS AND ENGINE BAY	2021-10-27	202141049031	Filed	National	Self
7	SENSITIZING TOY	2021-07-19	202141032318	Filed	National	Self
8	Self-SUSTAINABLE WEIGHING MACHINE	2021-09-20	202141042474	Filed	National	Self
9	PELTIER WATER BOTTLE FOR HEATING AND COOLING	2021-10-06	202141045417	Filed	National	Self
10	ELECTRICITY GENERATION USING MULTIPURPOSE GYM KIT	2021-10-06	202141045411	Filed	National	Self
11	SEMI AUTOMATIC GRAINS CARRY OVER MACHINE	2021-10-06	202141045421	Filed	National	Self
12	FABRICATION OF ENVIRONMENT-FRIENDLY ELECTRICITY GENERATION AND WASTE HEAT STORAGE FROM SOLID WASTE	24.06.2019	20191024716	Filed	International	Self
13	FABRICATION OF UNIVERSAL LOAD LIFTING ATATCHMENT	28.11.2019	20194104888	Filed	International	Self

S.No.	Achievements
1	Gold Medalist in M.E. (Thermal Engineering)
2	Gold Medalist in B.E. (Mechanical Engineering)

S.No.	Awards
1	Gold Medalist in M.E. (Thermal Engineering)
2	Gold Medalist in B.E. (Mechanical Engineering)
3	Dronacharya Award