Dr Dhinesh S K - Bannari Amman Institute of Technology

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	30.05.2017
Industry	Kovai Maruthi Papers and Boards P Ltd	21.05.2016	21.04.2017	0 Year & 11 Month(s)
Engineering	BIT Sathyamangalam	23.05.2013	18.05.2016	2 Year(s) & 11 Month(s)

Degree	Specialization	Institute	University	Year of Passing
B.E	ECE	M Kumarasamy College of Engineering	Anna University, Chennai	2011
M.E	Mechatronics	Kongu Engineering College	Anna University, Chennai	2013
Ph.D	Mechanical Engineering	Bannari Amman Institute of Technology	Anna University, Chennai	2024

S No.	Subject Area
1	MEMS Sensor Fabrication
2	Sensors and Instrumentation
3	Biomedical Instrumentation

Dhinesh S K, Nagarajan P, Raghunath M, Sundar S, “Ai Based Weed Locating and Deweeding Agri-Bot”, Third International Conference on “Smart Technologies, Communication and Robotics (STCR)”, Bit, 2023

Raghunath M, Nagarajan P, Senthil Kumar K L, Dhinesh S K, Tharakeshvar P A Prasanna A and Kavinkanth A,”Automated Storage and Retrieval System for Agricultural Warehouse Management”

Siddharthan B, Dhinesh S K, Nagarajan P, Raghunath M, Sundar S and Prasanna A,”Design and Fabrication of an Automated Paper-Cutting Machine for Re-Using Waste Papers”

Dinesh S K, Nagarajan P and Senthil Kumar K L, “Influence of Substrate Material and Sensor Geometry Variations on the Performance of Fused Deposition Modeling-Printed Strain Sensors”, Vol.No.15, Issue No.1, 45385, Doi: 10.1089/3dp.2023.0320

Dhinesh S K and Senthil Kumar K L, “Sensitivity Enhancement Through Geometry Modification of 3d Printed Conductive Pla-Based Strain Sensors”, Rapid Prototyping Journal, Aug 2023

S. K. Dhinesh, P. Nagarajan, M. Raghunath, S. Sundar, N. Dhanushree and S. Pugazharasu, “Ai Based Weed Locating and Deweeding Using Agri-Bot,” 2023 Third International Conference on Smart Technologies, Communication and Robotics (STCR), Sathyamangalam, India, 2023, Pages. 1-6, Doi: 10.1109/STCR59085.2023.10397025.

S.K. Dhinesh, J. Joshua Robert, S. Tushar Nair, D.H. Sharne Moni, S. Sona Fowzeya, K.L. Senthil Kumar, M and Raghunath, P. Nagarajan, “Recent Trends in Additive Manufacturing of Electronics Devices”, Volume 66, Part 3, 2022, Pages 928-941, Https://Doi.Org/10.1016/J.Matpr.2022.04.654.

Gokul, V, Dhinesh, S, Kalaiyarasu, K, Kalidasan, B, Ravikumar, M, “A Comprehensive Review on Solar Cooker Tracking Techniques for Performance Enhancement”, 1059, Vol. No.1, Pages.-2021,

Dhinesh, S.K, Senthil Kumar, K.L, Megalingam, A, Gokulraj, A.P, “Design and Fabrication of Low-Cost Micromachining System for Prototyping Printed Circuit Boards”, 9, Vol. No, Pages.-2021,

Dhinesh, S.K, Arun Prakash, S, Senthil Kumar, K.L, Megalingam, A, “Study on Flexural and Tensile Behavior of Pla, ABS and Pla-ABS Materials”, 45, Vol. No, Issue No.1175, Pages.1180-2021,

Senthil Kumar, K.L, Dhinesh, S.K, “Dielectric Fluid Parameter Optimization in Machining of Composite Material Using WEDM Process”, 995, Vol. No.1, Pages.-2020,

Dhinesh, S.K, Senthil Kumar, K.L, “A Review on 3d Printed Sensors”, 764, Vol. No.1, Pages.-2020,

Dhinesh, S.K, Parameshwaran, R, Praveen Kumar, S, “Influence of High Voltage on Heat Transfer Performance in Automobile Radiators”, 8, Vol. No.2 Special Issue 2, Issue No.111, Pages.114-2018,

Dhinesh S K, Nagarajan P, Raghunath M, Sundar S, “Ai Based Weed Locating and Deweeding Agri-Bot”, Third International Conference on “Smart Technologies, Communication and Robotics (STCR)”, BIT, 2023

Dhinesh S K, Senthil Kumar K L, Prasad K S, Gokulraj A P, Raghunath M, Madheswaran S, Saravanan M., “Design and Fabrication of Arduino Controlled CNC Foam Cutting Machine”, Second International Conference on New Age Systems and Automation Technologies – ICNAAT-2021, ECE Department – ICNAAT-2021, Erode, July 2021

Dr Senthil Kumar K L ,Dr Megalingam @ Murugan A, Mr Dhinesh S K, “Development of Portable Multi-Purpose Computer Numerical Controlled Machine”, International Conference on New Age Systems and Automation Technologies – ICNAAT-2021, BIT, July 2021.

Dhinesh S K, Senthil Kumar K L, Megalingam A, Gokulraj A P, “Design and Fabrication of Low-Cost Micromachining System for Prototyping Printed Circuit Boards”, International Conference on Materials, Manufacturing and Machining for Industry 4.0 (ICMMM 2.0), Department of Mechanical Engineering, Sathy, October 2020.

Senthil Kumar K.L, Dhinesh S.K, Arun Prakash S, “Optimization of Dielectric Fluid Parameters in Wire Electro Discharge Machining of Aluminium Composite”, COPEN 2019, IIT Indore, December 2019.

Dhinesh SK, Senthil Kumar KL, Megalingam A, Srisaran V, Arun Prakash S, “Fabrication of PLA and ABS Blend in 3D Printed Material”, International Conference on Advances in Materials and Research – 2019, BIT, Sathy, December 2019.

S K Dhinesh and K L Senthil Kumar, “A Review on 3D Printed Sensors”, International Conference on Advances in Materials Processing and Characterization, Department of Mechanical, Mechatronics and Aeronautical Engineering, BIT Sathy, August 2019.

D.Aravinthan, A.Hariharan, B.Ismail, S.K.Dhinesh, “Semi Automatic Ceiling Fan Cleaning System”, National Conference on Current , Kongu Engineering College, Erode, February 2018.

S.K.Dhinesh, R.Parameshwaran, S.Praveen kumar, “Improving the Cooling Performance of Automobile Radiators by Applying Electric Field in Various Coolants”, National Conference on Innovations in Mechanical, Mechatronics , Kongu Engineering College, Erode, April 2013.

S.K.Dhinesh, Dr.R.Parameshwaran, S.Praveen kumar, “Review of Improving the Cooling Performance of Automobile Radiators”, International Conference on Science, Engineering and Technology, VIT Vellore, November 2012.

Dhinesh S K, Sengottuvelan M, Ismail B, “MEMS Based Piezo Electric Beam Energy Harvester using Tidal Waves”, ICAMST 2017, BIT, Erode.

Degree	Title	Investigator(s)	Funding Agency	Amount	Project Status	Sanction Date
1	Development of Portable Multi-Purpose Computer Numerical Controlled Machine to Cater the Needs of SMES and Tribal Community	Dr. K.L. Senthil Kumar and Dr. A Megalingam @ Murugan	IEI	1.5 Lakhs	Submitted
2	Development of Low Cost Portable Multi-Purpose Computer Numerical Controlled Machine to Aid SMEs and People in Remote Areas	Dr K L Senthil Kumar	TNSCST	4,99,250	Submitted
3	Potential of Smart Additive manufacturing (4D Printing) in Medicine: Developing Medical Devices for the Growing Patient	Dr K L Senthil Kumar	ICMR	Rs. 5,13,000	Submitted	00.00.0000
4	Development of Multi-Purpose Machine to Fabricate Recyclable Plastic Parts to Enhance the Living of Tribal Community	Dr. K L Senthil Kumar	DST SEED - TSP Techno Interventions for Tribal Empowerment	7.66 Lakhs

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	INTELLIGENT COLOUR SORTING CONVEYOR BELT	13.03.2024	202441027541	Filed	National	Self
2	AQUAGUARD: ADVANCED WATER QUALITY MONITORING	25.03.2024	202441019874	Filed	National	Self
3	PAROTTA SMASHING MACHINE 1	25.03.2024	202441023324	Filed	National	Self
4	EXTENDABLE PAPAYA FRUIT PICKER WITH CONTAINER	30.03.2023	202341023774	Filed	National	Self
5	TRIMMER HAIR COLLECTOR	07.10.2022	202141015569	Published	National	Self
6	EXTENDABLE SAPODILLA FRUIT PICKER WITH STORAGE BAG	07.10.2022	202141014249	Published	National	Self
7	DUSTER WITH INTEGRATED WATER CARTRIDGE	07.10.2022	202141014251	Published	National	Self
8	3D PRINTING REUSABLE SPOOL WHEEL WITH Self LOCKING MECHANISM	07.10.2022	202141015565	Published	National	Self
9	SPLIT COMB	07.10.2022	202141014250	Published	National	Self
10	INTEGRATED COMBINATIONAL LOCK FOR TROLLEY BAGS	23.09.2022	202141011274	Published	National	Self
11	MULTI-BULB CHANGER KIT	16.09.2022	202141010220	Published	National	Self
12	RICE STAINER	29.08.2022	202241049161	Filed	National	Self
13	PAD TO PREVENT THE PLANTAIN TREES FROM BREAKING	29.08.2022	202241049159	Filed	National	Self
14	DESIGN AND FABRICATION OF RICE SERVING SPOON CLEANER	26.08.2022	202141007318	Published	National	Self
15	ACTION HELMET CAMERA MOUNT	2022-05-05	202241026128	Filed	National	Self
16	NAIL CUTTER WITH NAIL COLLECTOR	17.03.2021	202141011275	Published	National	Self
17	PORTABLE MACHINE FOR GAS BURNER CLEANING	2022-01-24	202241003785	Filed	National	Self
18	A DEVICE TO ARREST TAP WATER LEAKAGE	2021-08-09	202141035801	Filed	National	Self
19	SMALL ONION PEELER	2021-09-20	202141042458	Filed	National	Self
20	SELF-CLOSURE COUPLING TO PREVENT UNNOTICED WATER FLOW DURING OVERHEAD TANK REFILLING	07.05.2019	201941018147	Filed	National	BIT
21	DESIGN OF MICROBOLOMETER WITH CAPACITIVE TRANSDUCER	16.10.2019	201941041843	Filed	National
22	FOOT OPERATED DOOR STOP RELEASING ATTACHMENT FOR THE EXISTING SLIDING DOOR STOPPER	04.01.2021	202141000039	Filed	National	Self
23	DESIGN AND FABRICATION OF RICE SERVING SPOON CLEANER	22.02.2021	202141007318	Filed	National	Self
24	MULTI-BULB CHANGER KIT	11.03.2021	202141010220	Filed	National	Self
25	NAIL CUTTER WITH NAIL COLLECTOR	17.03.2021	202141011275	Filed	National	Self
26	INTEGRATED COMBINATIONAL LOCK FOR TROLLEY BAGS	17.03.2021	202141011274	Filed	National	Self
27	DUSTER WITH INTEGRATED WATER CARTRIDGE	30.03.2021	202141014251	Filed	National	Self
28	EXTENDABLE SAPODILLA FRUIT PICKER WITH STORAGE BAG	30.03.2021	202141014249	Filed	National	Self
29	HELMET WITH INBUILT AUTOMATIC LOCKING SYSTEM	30.03.2021	202141014252	Filed	National	Self
30	SPLIT COMB	30.03.2021	202141014250	Filed	National	Self
31	TRIMMER-HAIR COLLECTOR	01.04.2021	202141015569	Filed	National	Self
32	3D PRINTING REUSABLE SPOOL WHEEL WITH Self-LOCKING MECHANISM	01.04.2021	202141015565	Filed	National	Self
33	HUMAN EFFORT REDUCTION ATTACHMENT FOR CUTTING PLIER	22.04.2021	202141018552	Filed	National	Self
34	MULTI-FUNCTIONAL TOOL FOR THE EXTRUDER UNIT OF A 3D PRINTER	07.06.2021	202141025200	Filed	National	Self
35	A DEVICE TO ARREST TAP WATER LEAKAGE	09.08.2021	202141035801	Filed	National	Self
36	SMALL ONION PEELER	20.09.2021	202141042458	Filed	National	Self