Dr Kumaresan G - Bannari Amman Institute of Technology

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	30.09.2014
Research	National Institute of Technology Trichy	06.02.2012	29.09.2014	2 Year(s) & 7 Month(s)
Engineering	Kongu Engineering College	01.06.2011	03.02.2012	0 Year(s) & 8 Month(s)
Engineering	VSB Engineering College	25.06.2009	30.05.2011	1 Year & 11 Month(s)
Industry	Meenachi Associates Trichy	17.05.2006	27.07.2007	1 Year & 2 Month(s)

Degree	Specialization	Institute	University	Year of Passing
B E	Mechanical Engineering	PGP College of Engineering and Technology	Anna University, Guindy, Chennai	2006
M E	Thermal Engineering	Government College of Technology, Coimbatore	Anna University of Technology, Coimbatore	2009
Ph.D	Heat transfer	National Institute of Technology Trichy	National Institute of Technology, Tiruchirappalli	2015

S.No.	Subject Area
1	Thermal Engineering, Phase change study, Nanofluids and Heat pipes

Kumaresan G, M Ashokumar and P Sureshkumar, “Thermo Kinetic Behavior of Closed Loop Pump Dryer With Different Chambers for Holy Basil Leaves Drying Applications: An Experimental Approach”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. No.46, Issue. No.1, 2024

Kumaresan G, Nandhakumar E, Sathish R, B Arjun Kumar, Senthilkumar N, Marimuthu R, Yogapriya S, Sambasivam S, Thiyagarajan K, Kamatchi R, “Influence of Zno/Mwcnts Based Hybrid Electrodes for Boositng the Performance of Photovoltaic and Supercapacitor Devices”, Vol.No.316, Issue No.1, 45323, https://doi.org/10.1016/j.matchemphys.2024.129049

Kumaresan G, Paneerselvam N, Sekar T and Vijayakumar M, “An Enhanced Technique for Friction Stir Welding of Ceramic Particle Reinforced Aluminium Based Metal Matrix Composites”, Vol.No.36, Issue No.3, 45292, DOI: 10.1002/ls.1687

Kumaresan G, Rajendran Manikandan, Thimmarayan Raja, Kengaiah Vijaya Raja, Gopi Suresh, Rajasekharan Vezhavendan and Raju Ganesamoorthy, “Combustion Performance and Emission Characteristics of Aloevera Diesel-Emulsified Fuel in a Diesel Engine”, 45352, doi: 10.1007/s11356-024-33025-2.

Ashok Kumar M, Kumaresan G, Rajakarunakaran S, Sivakumar V”, Performance Comparison of Closed Loop Heat Pump Dryer With Bed, Tray and Bed-Tray Dryer For Curry Leaves”, National Convention of Mechanical Engineers https://doi.org/10.36375/prepare_u.iei.a228

Kumaresan G, Vijayakumar M, Suresh Muthusamy, Hitesh Panchal, “Performance Analysis of Evacuated Tubes With Thermosyphon Heat Pipe Solar Collector Integrated With Compound Parabolic Concentrator Under Different Operating Conditions”, Energy Exploration & Exploitation, Vol. No.1, Issue No.1, 2023

Kumaresan G, Vignesh Rajasekar, Tamilvanan Ayyasamy, “Split Injection Strategy Control Map Development Through Prediction‑Based Calibration Approach to Improve The Biodiesel‑Fuelled Diesel Engine Characteristics”, Environmental Science and Pollution Research, Vol. No.45292, Issue No.1, 2023

Kumaresan G, Palaniappan Ragupathy, Murugesan Vijayakumar and Manirao Lakshmi, “A Comparative Study on 3e (Energy, Exergy and Economic) Analysis of Solar Pv Operated Dome-Shaped Solar Stills”, Thermal Science, Vol. No.1, Issue No.1, 2023

Ashok Kumar M, Kumaresan G, Sivagaminathan M, Siva Subramanian R and Gururaj C, “Experimental Performance Analysis of Free and Forced Fully Developed Air Flow Green House Solar Dryer Using Curry Leaves”, E3S Web Conf, Volume 399, International Conference on Newer Engineering Concepts and Technology (ICONNECT-2023), Pages. 14, https://doi.org/10.1051/e3sconf/202339902008. 2023,

Kumar, M.A, Kumaresan, G, Sivagaminathan, M, Rajakarunakaran, S, Subramanian, R.S, “Performance Comparison of Tray, Bed and Integrated Drying Chamber in Closed Loop Heat Pump Dryer for Bermuda Grass”, E3S Web of Conferences, Vol. No.399, 2023.

Kumaresan G, Palaniappan Ragupathy, Murugesan Vijayakumar and Manirao Lakshmi, “A Comparative Study on 3e (Energy, Exergy and Economic) Analysis of Solar PV Operated Dome-Shaped Solar Stills”, Thermal Science, Vol. No.1, Issue No.1, 2023

Ramesh, C, Vijayakumar, M, Kumaresan, G, Selvanayagam, B.F, “Enhanced Honey Badger Optimization of Performance Analysis of Evacuated Tube Heat Pipe Solar Collector Integrated with PCM Storage Unit”, Energy and Environment, 2023.

Antony Prabu, D, Jayakumar, K.S, Madhavan Pillai, E, Kumaresan, G, “Optimization of Gtaw Process Parameters of Dissimilar Al-Mg Alloys For Enhanced Joint Strength – Taguchi Approach”, Archives of Metallurgy and Materials, Vol. No.68, Issue No.2, Pages.599-606, 2023.

Suresh, K, Selvakumar, P, Kumaresan, G, Vijayakumar, M, Ravikumar, M, Jenita, N.R, “A Critical Review on the Effect of Morphology, Stability, and Thermophysical Properties of Graphene Nanoparticles in Nanolubricants and Nanofluids”, Journal of Thermal Analysis and Calorimetry, Vol. No.148, Issue No.2, Pages.451-472, 2023.

N. Bhuvanesh, G. Kumaresan, K. Renuka, R. Mukeshu, Mohammed Hakeem, V.N.N. Harish, “Investigation on Development and Performance Analysis of Water Trash Collector”, Volume 66, Part 3, 2022, Pages 1216-1220, https://doi.org/10.1016/j.matpr.2022.05.014.

Palanivel, V, Govindasamy, K, Arunachalam, G.K, “Optimization and Prediction of Pulsating Heat Pipe Compound Parabolic Solar Collector Performances by Hybrid Deep Belief Network Based Bald Eagle Search Optimizer”, Environmental Progress and Sustainable Energy, Vol. No.41, Issue No.2, 2022.

Hariprasad, P, Kumaresan, K, Vijayakumar, M, Kumaresan, G, “Surface and Wear Investigation on Microwave Sintered Nitinol Composite”, Materials Research, Vol. No.25, 2022.

Manikandan, R, Suresh, G, Abbas, S.M, Selvi, S, Begum, S.S, Vezhavendhan, R, Kumaresan, G, “An Investigation on Thermo-Mechanical Characterization of Activated Carbon/coconut Shell Powder Reinforced Natural Composites”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2022.

Kumar, P.M, Saminathan, R, Tharwan, M, Hadidi, H, Stalin, P.M.J, Kumaresan, G, Ram, S, Rinawa, M.L, Saravanakumar, P.T, Karthikeyan, K, Gebreyohannes, D.T, “Study on Sintered Wick Heat Pipe (SWHP) with CuO Nanofluids under Different Orientation”, Journal of Nanomaterials, Vol. No.2022, 2022.

Vino, A, Kalaichelvan, K, Sajith, S, Kumaresan, G, “Studies on Flexural Properties and Construction of Failure Mode Map for CoPageser Sandwich Panels”, Archives of Metallurgy and Materials, Vol. No.67, Issue No.4, Pages.1371-1380, 2022.

Raja, T, Kumaresan, G, “Numerical Analysis of The Influence of Flow Direction on Heat Distribution Performance of a PEM Fuel Cell With Serpentine Flow Field Deign”, Materials Today: Proceedings, Vol. No.66, Pages.838-844, 2022.

Sivasubramanian, R, Kumaresan, G, Santhosh, N, Reshvanth, K.S, Syed Riyasudeen, S, Shannon Medone, R, “Performance Analysis of Multipass Tubes Solar Water Heater Using Nanofluids”, Materials Today: Proceedings, Vol. No.66, Pages.1051-1055, 2022.

Reji, A.K, Kumaresan, G, Kaushik, N, Navin Karthi, V.S, Naveen, M.K, “Thermal Analysis of Grooved Heat Pipe With Eco-Friendly Refrigerant For Low Heat Loads in Comparison to an Ordinary Thermosyphon”, Materials Today: Proceedings, Vol. No.66, Pages.878-882, 2022.

Dhanapal, K, Raman, M, Kamatchi, R, Kumaresan, G, “Role of Method of Synthesis on The Size of Flakes, Dispersion Stability And Thermophysical Properties of Aqua Based Reduced Graphene Oxide Nanofluids”, Journal of Thermal Analysis and Calorimetry, Vol. No.144, Issue No.1, Pages.233-243, 2021.

Siva Subramaniana R, Kumaresan G, Santosh Karthik A, Sivaganes K C, Suryabalan and A R Venkat Guhan,””Analysis of Modified Shell and Tube Heat Exchanger”, International Conference on Advancements in Materials and Manufacturing Engineering – Icamme 2021: Icamme 2021, Volume 2527, Issue1doi.org/10.1063/5.0108203

Ashok Kumar, M, Kumaresan, G, Rajakarunakaran, S, “Investigation of Drying Rate in Moringa Leaves Under Periodic and Continuous Airflow in Vacuum Condition”, Springer Proceedings in Materials, Vol. No.5, Pages.61-71, 2021.

Ashok Kumar M, Kumaresan G and Rajakarunakaran S,”Performance Evaluation of Heat Pump Dryer in Specific Moisture Evaporation Rate For Various Herbal Leaves”, International Journal of Engineering Research & Technologyissn: 2278-0181 Ijertv10is070051 Vol. 10 Issue 07, July-2021

Bhuvanesh, N, Kumaresan, G, Subramaniyan, C, Sasikumar, C, Mukeshu, R, “Harvesting of Electricity from Handloom Weaving Machine Coupled with Dynamo”, Springer Proceedings in Materials, Vol. No.5, Pages.459-466, 2021.

Kumaresan, G, Siva Shanmugam, N, Dhinakaran, V, “Preface”, Springer Proceedings in Materials, Vol. No.5, Pages.v-vi, 2021.

Vijay, R, Vijayakumar, P, Kumaresan, G, Kumar, S.G, “Performance Study of Flat Plate Solar Collector Integrated With Twisted Tape Inserts”, Materials Today: Proceedings, Vol. No.45, Pages.1222-1226, 2021 .

Subramaniyan, C, Prakash, K.B, Kalidasan, B, Amarkarthik, A, Kumaresan, G, “Uncertainty Analysis on Performance of Double Stage Reciprocating Air Compressor With Inter Cooler”, Materials Today: Proceedings, Vol. No.45, Pages.1233-1236, 2021.

Reji, A.K, Kumaresan, G, Mukundhan, A, Menon, A.S, Harikrishna, A.P, Parappadi, J.J, “Experimental Analysis of A Four Slope Solar Still Augmented with a Parabolic Reflector Array With V-Shaped Mirror Arrangement For Pre-Heating Brackish Water”, Materials Today: Proceedings, Vol. No.45, Pages.1834-1838, 2021

Bhuvanesh, N, Kumaresan, G, Rajasekaran, S, Adish, N.K, Saravanan, K, Subramaniyan, C, “Experimental Modelling And Analysis of Semi-Automated Waste Black Plastic Materials Sorter”, Materials Today: Proceedings, Vol. No.45, Pages.2029-2033, 2021.

Siva Subramanian, R, Kumaresan, G, Palanivel, R, Nishanth kalathil, P, Nirmal, B, “Comparative Performance Analysis of Parabolic Trough Solar Collector by Varying Absorber Surface”, Materials Today: Proceedings, Vol. No.45, Pages.1217-1221, 2021.

Ashok Kumar, M, Kumaresan, G, Rajakarunakaran, S, “Experimental Study of Moisture Removal Rate in Moringa Leaves Under Vacuum Pressure in Closed-Loop Heat Pump Dryer”, Materials Today: Proceedings, Vol. No.45, Pages.1205-1210, 2021.

Subramanian, R.S, Kumaresan, G, Ajith, R, Sabarivasan, U, Gowthamaan, K.K, Anudeep, S, “Performance Analysis of Modified Solar Still Integrated with Flat Plate Collector”, Materials Today: Proceedings, Vol. No.45, Pages.1382-1387, 2021.

Reji, A.K, Kumaresan, G, Sarathi, A, ArasaPagesa, G.P.S, Kumar, R.S, Matthew, M.S, “Analysis of Thermosiphon Working with Eco-Friendly Refrigerant Under Various Fill Ratios”, Materials Today: Proceedings, Vol. No.45, Pages.2618-2621, 2021.

Reji, A.K, Kumaresan, G, Sarathi, A, Saiganesh ArasaPagesa, G.P, Suriya Kumar, R, Shelton Matthew, M, “Performance Analysis of Thermosyphon Heat Pipe Using Aluminum Oxide Nanofluid Under Various Angles of Inclination”, Materials Today: Proceedings, Vol. No.45, Pages.1211-1216, 2021.

Sivasubramanian, R, Kumaresan, G, Kumar, N.N, Rajeshwaran, S.K, Jeyaseelan, R, Manikandan, V, Maran, B.M, “Design And Analysis of Air Powered Vehicle Frame”, Materials Today: Proceedings, Vol. No.45, Pages.1366-1370, 2021.

Vijayakumar, P, Kumaresan, G, Kumar, S.G, Eswaran, M, “A Review on Applications of Nanofluid in Evacuated Tube Heat Pipe Integrated with Compound Parabolic Concentrator”, Materials Today: Proceedings, Vol. No.45, Pages.1227-1232, 2021.

Pandiaraj, S, Ayyasamy, T, Govindasamy, K, “Heat Transfer Augmentation Using Water-In-Glass Evacuated Tube Coupled with Parabolic Trough in Rack Dryer in the Drying of Capsicum Frutescens”, International Journal of Heat and Technology, Vol. No.38, Issue No.4, Pages.895-902, 2020.

Vijayakumar, P, Kumaresan, G, Anish Kumar, S, Sudhagar, S, Vijay Chandran, G.R, Vishnu Adharsh, K.S, “Development of Solar Oven Employed with Parabolic Concentrator”, IOP Conference Series: Earth and Environmental Science, Vol. No.312, Issue No.1, 2019.

Vijayakumar, P, Kumaresan, G, Anish Kumar, S, Mohamed Faizal, U, Vijay Chandran, G.R, Vishnu Adharsh, K.S, “Performance Evaluation of Compound Parabolic Concentrator With Evacuated Tube Heat Pipe”, IOP Conference Series: Earth and Environmental Science, Vol. No.312, Issue No.1, 2019.

Reji, A.K, Kumaresan, G, Menon, A.S, Mukundhan, A, Harikrishna, A.P, ParaPagesadi, J.J, “Performance Evaluation of a Novel Wick Type Four Slope Solar Still Coupled with a Parabolic Reflector”, International Journal of Innovative Technology and Exploring Engineering, Vol. No.8, Issue No.8, Pages.1678-1681, 2019.

Kumaresan, G, Vijayakumar, P, Ravikumar, M, Kamatchi, R, Selvakumar, P, “Experimental Study on Effect of Wick Structures on Thermal Performance Enhancement of Cylindrical Heat Pipes”, Journal of Thermal Analysis and Calorimetry, Vol. No.136, Issue No.1, Pages.389-400, 2019.

Bhuvanesh, N, Kumaresan, G, Subramaniyan, C, “Performance and Emission Characteristics Analysis of Di-Diesel Engine Fuelled with Calophyllum Inophyllum Methyl Ester Diesel Blend”, International Journal of Mechanical and Production Engineering Research and Development, Vol. No.9, Pages.171-176, 2019.

Kamatchi, R, Kumaresan, G, “Investigations on Pool Boiling Critical Heat Flux, Transient Characteristics and Bonding Strength of Heater Wire With Aqua Based Reduced Graphene Oxide Nanofluids”, Chinese Journal of Chemical Engineering, Vol. No.26, Issue No.3, Pages.445-454, 2018.

Vijayakumar, M, Navaneethakrishnan, P, Kumaresan, G, Kamatchi, R, “A Study on Heat Transfer Characteristics of Inclined CoPageser Sintered Wick Heat Pipe Using Surfactant Free CuO And Al2O3 Nanofluids”, Journal of the Taiwan Institute of Chemical Engineers, Vol. No.81, Pages.190-198, 2017.

Vijayakumar, M, Navaneethakrishnan, P, Kumaresan, G, “Thermal Characteristics Studies on Sintered Wick Heat Pipe Using CuO And Al2O3 Nanofluids”, Experimental Thermal and Fluid Science, Vol. No.79, Pages.25-35, 2016.

Venkatachalapathy, S, Kumaresan, G, Suresh, S, “Performance Analysis of Cylindrical Heat Pipe Using Nanofluids – An Experimental Study”, International Journal of Multiphase Flow, Vol. No.72, Pages.188-197, 2015.

Kumaresan, G, Venkatachalapathy, S, Asirvatham, L.G, “Experimental Investigation on Enhancement in Thermal Characteristics of Sintered Wick Heat Pipe Using CuO Nanofluids”, International Journal of Heat and Mass Transfer, Vol. No.72, Pages.507-516, 2014.

Kumaresan, G, Venkatachalapathy, S, Asirvatham, L.G, Wongwises, S, “Comparative Study on Heat Transfer Characteristics of Sintered and Mesh Wick Heat Pipes Using CuO Nanofluids”, International Communications in Heat and Mass Transfer, Vol. No.57, Pages.208-215, 2014.

Singh, P, Venkatachalapathy, S, Kumaresan, G, “Heat Transfer Studies on Condensation Using Heat Pipes”, Applied Mechanics and Materials, Vol. No.592-594, Pages.1617-1621, 2014.

Kumaresan, G, Venkatachalapathy, S, Naik, I.C, “An Experimental Study on Improvement in Thermal Efficiency of Mesh Wick Heat Pipe”, Applied Mechanics and Materials, Vol. No.592-594, Pages.1423-1427, 2014

Kumaresan G, “Processing of Dyeing Waste Water and Efficiency Treated for Agriculture Application”, International Conference on “ICWEE 2021”, Sathyabama Institute of Science and Technology, 2021.

Kumaresan G, “Analysis of Effective and Cost Efficient Desalination Process Using Graphene Nanopores”, International Conference on “ICWEE 2021”, Sathyabama Institute of Science and Technology Chennai, 2021.

G.Kumaresan, N. Bhuvanesh, “Investigation on the effects of Antioxidant Additive in a DI – Diesel Engine Fuelled with Calophyllum Inophyllum Methyl Ester Diesel Blend”, National Conference for Technologies on green Mobility, Dept Automobile Engineering, BIT Sathy, March 2018.

G.Kumaresan, “Automated Tool and Tube Inspection”, Advances in Mechanical and Civil Engineering, M.Kumarasamy College of Engineering Karur, March 2018.

Vijayakumar. T, Vivek. K, Vikram. K, Kumaresan. G, ” Smart system for tool insert “, Teqip Sponsored ICAMMM, Governernment College of Engineering, Salem, March 2017.

M. Ravikumar, G. Kumaresan, PSS. Srinivasan, “A Review On Phase Change Energy Storage System With PCM Materials And Its Applications “, ICAD, NIT Trichy, December 2014.

G.Kumaresan, S.Venkatachalapathy, Indraneel C. Naik, ” An Experimental Study on Improvement in Thermal Efficiency of Mesh Wick Heat Pipes”, Internation Mechanical Engineering Congress – 2014, National Institute of Technology, June 2014.

G.Kumaresan, S.Venkatachalapathy, Indraneel C. Naik, ” A Performance Analysis of Cylindrical Sintered Wick Heat Pipe with Different Working Fluids, IEEE International Conference on â??Emerging Trends in Science, Engineering, Business and Disaster Management – ICBDM 2014, Noorul Islam University, Tamil Nadu, February 2014.

Punith Singh, S.Venkatachalapathy, G.Kumaresan, ” Heat Transfer Studies on Condensation using Heat Pipes “, International Mechanical Engineering Congress , National Institute of Technology, Trichy, June 2013.

G.Kumaresan, S. Sureshkumar, “Effect of Tabs on Enhancement of Mixing Characteristics of Jet”, National Conference on “Modeling and Optimization of Automotive Systems”, Department of Automobile Engineering, Karpagam University, Coimbatore., March 2011.

S.No.	Title	Investigator(s)	Funding Agency	Amount	Project Status	Sanction Date
1	Design, Development and Validation of Thermocycler and Real time Cycler (DNA amplification Instrument) mostly used in disease diagnosis	Dr. Selvaraj S P	Department of Science and Technology - Instrumentation Development Programme	34,46,000	Project Sanctioned and First Phase Amount Received	18.05.2018
2	TEQIP - International Research Fund	Dr.G.Kumaresan	TEQIP	1,00,000.00	completed	01.07.2014
3	Proposal submitted under Symposia Grant Scheme for Organizing an International conference on Advances in materials and research (ICAMR-2019)	Dr M Ravikumar	Council of Scientific	2,40,000
4	Proposal submitted under Symposia Grant Scheme for Organizing an International conference on Advances in materials and research (ICAMR-2019)	Dr M Ravikumar	CSIR-Symposium Grant	50000		17.10.2019

S.No.	Scholar Name	Register Number	Date of Reg.	Title of the Ph.D Thesis / Tentative title of the Research	Status
1	Arun Kurien Reji	17152697172	24.06.2017	Heat Transfer Analysis in Dimmbled Surface with Refrigerant	Confirmation Completed
2	MR R Vijay	1614269108	28.01.2016	Fresh Water Production Using Solar Desalination	Completed on 08.12.2023
3	MR Shivakumar N	1615219164	05.02.2021	Influence Of Piston Crown Shape With Different Positions of Spark Plug and Fuel Injector,% Egr, and Fuel System Control on Emissions From Modified Gdi Engines Compared With A Base Diesel Engine	Completed on 12.04.2023
4	MR Sivasubramaniyan R	17142697169	13.06.2017	Experimetnal Study on Dimmbled Heat Pipe with Nanofluids	Synopsis Submitted
5	Bhuvanesh N	17142697300	24.06.2017	Thermal Performance Analysis of Heat Pipe in Shaping Machine	Confirmation Completed
6	M Ashok Kumar	19142691120	02.01.2019	Enhancement of Mass Transfer for Drying Herbal Leaves Through Optimization Techniques	Confirmation Completed
7	P Vijayakumar	17142691305	02.01.2017	Performance Analysis And Optimzation Of A Solar Collector Integrated With Pulsating Heat Pipe And Compound Parabolic Concentrator	Completed on 13.01.2023
8	Raja T	191226977239	07.06.2019	Thermal Management In Pem Fuel Cell	Confirmation Completed

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	DEVELOPMENT OF AN IOT-BASED SYSTEMATIC MODEL FOR MONITORING THE COLD SUPPLY CHAIN IN THE FOOD INDUSTRY	26.09.2023	202341064474	Filed	National	Self
2	IOT BASED RISK MONITORING SYSTEM FOR COLD SUPPLY CHAIN	09.11.2022	202241063813	Filed	National	Self
3	SOLAR POWERED OBJECT SENSING BASED PUBLIC LIGHTING FIXTURE	11.02.2022	373511-001	Filed	National	Self
4	SOLAR POWERED BIOMASS INTEGRATED CROP DRYER	25.08.2022	369790-0011	Filed	National	Self
5	DEVELOPMENT OF IOT CONTROLLED HANDLOOM MACHINE	28.12.2021	202141061119	Filed	National	Self
6	IRREGULAR SHAPE MEASURING TOOL	27.10.2021	202141049011	Filed	National	Self
7	FIRE REPULSION UNIT IN VEHICLE CHASSIS AND ENGINE BAY	27.10.2021	202141049031	Filed	National	Self
8	PELTIER WATER BOTTLE FOR HEATING AND COOLING	06.10.2021	202141045417	Filed	National	Self
9	ELECTRICITY GENERATION USING MULTIPURPOSE GYM KIT	06.10.2021	202141045411	Filed	National	Self
10	SEMI AUTOMATIC GRAINS CARRY OVER MACHINE	06.10.2021	202141045421	Filed	National	Self
11	BLACK WASTE PLASTIC SORTER	20.09.2021	202141042475	Filed	National	Self
12	METAL MONOLITH BASED SMOKELESS INCINERATOR FOR DOMESTIC APPLICATIONS	20.09.2021	202141042472	Filed	National	Self
13	SELF-SUSTAINABLE WEIGHING MACHINE	20.09.2021	202141042474	Filed	National	Self
14	FABRICATION OF ENVIRONMENT-FRIENDLY ELECTRICITY GENERATION AND WASTER HEAT STORAGE FROM SOLID WASTE	24.06.2019	20191024716	Filed	International	Self
15	FABRICATION OF UNIVERSAL LOAD LIFTING ATTACHMENT	28.11.2019	20194104888	Filed	International	Self

S.No.	Topic	Program	Venue	Date
1	Guidelines to write an effective Research Article	Webinar	Pavaai Engineering College, Namakkal	11.01.2022
2	Nanofluids preperation and chraterization for in Solar thermal system	One day national workshop	Mechanical Seminar Hall, Bannari Amman Institute of Tehnology, Sathyamangalam	07.03.2018
3	Nanofluids preparation, characterization and its application on Heat pipe Heat exchanger	Guest Lecture	Kumaraguru College of Technology, Coimbatore	18.11.2017
4	Recent Trends in Thermal Engineering	Two Days National Workshop	Mahendra College of Engineering and Technology, Salem.	07.02.2017
7	Combustion in IC engines	Two Days workshop	Mechanical Engineering Department, BIT Sathy	05.10.2016
5	Combustion in IC engines	Two Days workshop	Mechanical Engineering Department, BIT Sathy	05.10.2016

S.No.	Awards
1	Best Mentor Award, Campus Talent 2.0, Project Contect Innovation LLP - 25.09.2022
2	Best Paper Award, KITS Engineering College, IEI State Centre of Andhra Pradesh - 27.08.2022
3	Exceptional Contribution as Mentor - SIH 2022, MOE's Innovation Cell, Ministry of Education, Government of India - 29.08.2022
4	Outstanding Reviewer Award from Applied Thermal Engineering Elsevier, Netherland
5	Outstanding Reviewer Award from IJHMT Elsevier,Netherland Netherland
6	Best paper Award for Research article presentation held at Bankok, Thailand