Research Facilities

Movitrac Training Model 90153936

Equipment Capabilities

Pricise control of motor speed

Specifications

Motor ( Induction Motor / 50Hz / 1380rpm /370W / 220-242V / 380 - 420V Y);Encoder (E17C / Incremental); Drive (Movitrac MC07B),Accessories (SMPS, Star-Delta Conversion, Brake Resistor, Brake Rectifier and MCB)

Laboratory

Centre For Drives and Automation (SEW Eurodrive )

Movifit Training Model 90153936

Equipment Capabilities

Pricise control of motor speed

Specifications

Motor (Induction Motor / 50Hz / 1380rpm /370W / 220-242V / 380 - 420V Y); Drive (Movifit Fc MTF11A Classic);Accessories(MCB)

Laboratory

Centre For Drives and Automation (SEW Eurodrive )

Movidrive Training Model 90153901

Equipment Capabilities

Precise control of motor speed and position

Specifications

Motor (Induction Motor / 50Hz / 1380rpm / 370W / 220-242V / 380-420V Y); Encoder (ES7S / Incremental) ;Drive (Movidrive MDX61B); Accessories(SMPS, Star-Delta Conversion,Brake Resistor, Brake Rectifier and MCB)

Laboratory

"Centre For Drives and Automation (SEW Eurodrive ) "

MPS PA Compact Workstation with level, flow rate, pressure and temperature controlled systems

Equipment Capabilities

The setup is capable of simulating a flow process. By controlling the flow rate and pressure, the manipulated variable of the controller can also be used to operate a proportional directional control valve. The two-way ball valve can be used to simulate a "load" for disturbance variable compensation in the level controlled system. A the parameters for different fluids

Specifications

"Mechanical components: 2 reservoirs, pressure reservoir, plug-in tube system, filter regulating valve, mounting frame, profile plate Sensors: 2 capacitive sensors, 2 float switches, ultrasound sensor, flow sensor, pressure sensor, temperature sensor PT100 Actuators: pump, proportional directional control valve, 2-way ball valve with pneumatic quarter turn actuator and end-position sensing, double-acting, heating Electrical components: I/O connection board with measuring transducer, motor controller, I/O terminal, SysLink, 8I/8O, analog terminal, SysLink, 15-pin"

Laboratory

Festo Lab

MPS PA Workstation

Equipment Capabilities

The setup is capable of simulating a complete automation process. With a program to alter the sequence, research on

Specifications

" Power supply: 24 V DC Maximum workpiece width: 40 mm Length: 300, 350 or 700 mm Conveyor height above profile: approx. 117 mm 3 digital sensors 3 digital actuators"

Laboratory

Festo Lab

Bottle Filling Station

Equipment Capabilities

The quality of the bottle filling process can be optimized using various control algorithms such as P, PI or PID. The research can be focused on design and simulation program FluidSIM Pneumatics and WBT Open- and closed-loop control

Specifications

Automated Bottling Station with Conveyor Setup

Laboratory

Festo Lab

Fluidic Muscle Press Station

Equipment Capabilities

The Fluidic Muscle Press station presses workpiece inserts into the housings. The press-in speed and depth can be varied both manually via throttle and pressure regulator  and electronically  via the proportional pressure regulator. The potential research studies specific this setup include analog signal processing, pressing unconventional workpiece, optimization of control parameters to maximum the throughput and yield.

Specifications

"Operating pressure 600 kPa (6 bar), Power supply 24 V DC, 8 digital inputs, 7 digital outputs "

Laboratory

Festo Lab

NI 9233 Compact DAQ Instrumentation Bundle

Equipment Capabilities

The Data Acquisition Card (DAQ) is compatible with a single-module USB carrier and NI CompactDAQ and CompactRIO hardware, the NI 923 is ideal for a wide variety of mobile/portable applications such as industrial machine condition monitoring and in-vehicle noise, vibration, and harshness testing.

Specifications

4-channel +/- 5V, 50Ks/S, per channel 24 bit 1EPE analog cable 10 Pin Modular Plug, Digital wire 2 mtrs

Laboratory

Mechatronics Laboratory

Vibration and Acceleration Measurement Module

Equipment Capabilities

The National Instrument

Specifications

NI 9234 DAQ, IMI Accelerometer, BNC Male (plug) to BNE Male (plug) cable, 2m

Laboratory

Sensors and Instrumentation Lab

Speed Measurement and Position control of Servo Motor

Equipment Capabilities

The National Instruments NI-7342 allows measurment of speed and precise position control of Servo motors by a signal (data) better known as a pulse-width modulator (PWM). Using the servo motor, research activities are capable in widespreading areas ranging from Robotics, Advanced manufacturing and machining, Solar tracking, textiles and home automation.

Specifications

NI PCI 7342, NI UMI 7774, SHC68-C68-S cable (2m), AKM11B Motor 4000RPM, Motor Power Cable, AKM Motor to AKD Drive 1m, SFD Feedback Cable, AKM Motor to AKD Drive 1m, Single Axis AKD Drive, ECAT, 3A Continuous Current, 240V

Laboratory

Sensors and Instrumentation Lab

6 Axis Fanuc LR Mate 200iD/4S Robot

Equipment Capabilities

Industrial Robot (Fanuc) not only redefines heavy material handling but also opens up a wealth of research possibilities in smart automation, palletizing and trajectory planning

Specifications

Pneumatic assy, Escapement assy, Component Collector plate,Fanuc Robot assembly with 3 jar gripper and finger, loading 3 jaw gripper assy, Pick fixture assy, stabilizer, transformer, robot controller

Laboratory

Industrial and Mobile Robotics Lab